Switch Pack Default Settings for the DE201

Switch    Position   Function                 Default
-------------------------------------------------------------------------
SW1	  ON	     Sets the memory          Sets the memory address
SW2	  OFF	     address range.           range to D0000 - DFFFF
                                              (hex).

-------------------------------------------------------------------------
SW3	  ON	     Selects the buffer       Enables 64 KB memory
SW4       ON         memory size.             size.


-------------------------------------------------------------------------
SW5       ON         Sets the I/O address.    I/O starting address is set
                                              to 300 (hex).

-------------------------------------------------------------------------
SW6       ON         Enables or disables      Remote boot disabled.
                     remote boot feature. 
		     (See Note 1)

-------------------------------------------------------------------------
SW7       OFF        Sets the timeout period  Sets a 30 second timeout
                     for the remote boot      period.
                     attempt. (See Note 1)

-------------------------------------------------------------------------
SW8       ON         Enables IRQ5             IRQ5 enabled

-------------------------------------------------------------------------
SW9       OFF        Enables IRQ9             IRQ9 disabled
SW10      OFF        Enables IRQ10            IRQ10 disabled
SW11      OFF        Enables IRQ11            IRQ11 disabled
SW12      OFF        Enables IRQ12            IRQ12 disabled

-------------------------------------------------------------------------
Note 1 This feature requires that a remote boot ROM chip be installed. 

-------------------------------------------------------------------------
For more information See the DEC EtherWORKS Turbo/TP Ethernet 
Controller User Manual (Appendix B).