Hello,
Our systems came factory installed with LSM. We did not want to use it, so
we removed it. LSM was installed and the rootdg diskgroup was there, but
there were no disks configured.
To uninstall, we used 'volunroot' (or something like this) and then we
removed the subsets with setld -d and rebuilt the kernel.
The problem we are facing now is that there are still some 'leftovers' and
we have to re-install LSM to mirror our /, /usr and primary swap disks. We
are wondering if we should remove those leftover before re-installing LSM,
or if the installation procedure will overwrite it by itself.
Among the suspect things we have:
disklabel -r /dev/rrz0a gives:
# /dev/rrz0a:
type: SCSI
disk: RZ28D
...
8 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:   131072        0     ADVfs                    	# (Cyl.    0 - 82*)
  b:   806912   131072    unused     1024  8192       	# (Cyl.   82*- 592*)
  c:  4110480        0    unused     1024  8192       	# (Cyl.    0 - 2594)
  d:        0        0    unused     1024  8192       	# (Cyl.    0 - -1)
  e:        0        0    unused     1024  8192       	# (Cyl.    0 - -1)
  f:        0        0    unused     1024  8192       	# (Cyl.    0 - -1)
  g:  3171472   937984     ADVfs                    	# (Cyl.  592*- 2594*)
  h:     1024  4109456   LSMsimp                    	# (Cyl. 2594*- 2594*)
                           ^^^
                            |
                            ----- What is this ?
If I issue an ls -al /dev/vol* here is what i get:
crw-r--r--   1 root     system    41,  0 Apr 17  1996 /dev/volconfig
crw-r--r--   1 root     system    41,  1 Apr 17  1996 /dev/volevent
crw-r--r--   1 root     system    41,  3 Apr 17  1996 /dev/volinfo
crw-r--r--   1 root     system    41,  2 Apr 17  1996 /dev/voliod
/dev/vol:
total 32
drwxr-xr-x   3 root     system      8192 May  3  1996 .
drwxr-xr-x   9 root     system     16384 May  1 12:00 ..
drwxr-xr-x   2 root     system      8192 Apr 17  1996 rootdg
Can I safely destroy all this ?
Other question: We had a bunch of LSM manuals shipped with the system. We
are running DU 3.2D-1 and we have licensed the LSM GUI. We have 4-5 white
manuals about LSM version 1.0 and we have the LSM version 1.2 red manual.
What is the  version of LSM that shipped with DU 3.2D-1 ? I suppose it is
1.2 but I just wanted to make sure. I found no way of knowing this. I
looked with setld, the manuals, the installation guide, the CD table of
contents, the version number of LSM is listed nowhere, and it is not
installed anymore, so I cannot do an 'about'
For your info, here is what I get with setld -i | grep LSM:
OSFLSMBASE350                   Logical Storage Manager (General Applications)
OSFLSMBASE360                   Logical Storage Manager - Patch 001
(General Applications)
OSFLSMBIN350                    Logical Storage Manager Kernel
Objects(Kernel Build Environment)
OSFLSMBIN360                    Logical Storage Manager Kernel Objects -
Patch 001 (Kernel Build Environment)
OSFLSMBINCOM350                 Logical Storage Manager Kernel Header and
Common Files(Kernel Build Environment)
OSFLSMBINCOM360                 Logical Storage Manager Kernel Header and
Common Files - Patch 001 (Kernel Build Environment)
OSFLSMPGMR350                   LSM Software Development (Software
Development)
OSFLSMX11350                    Logical Storage Manager GUI (General
Applications)
Thanks !
Guy Dallaire
dallaire_at_total.net
"God only knows if god exists"
Received on Fri May 02 1997 - 17:59:20 NZST