Hi. I'm having a problem on an AS1200, 4.0D with patches installed. Last
Saturday I had to change a disk in a striped
LSM volume, rebuild the ADVFS domains and restore the data from backup.
Since then, the defragcron script has
been causing a panic as follows:
10:36 # defragcron -p
defragment -T 83 data
defragment -T 83 data1
defragment: Defragmenting domain 'data'
defragment: Defragmenting domain 'data1'
10:44 defragment: Defragmented domain 'data1'
11:32 panic (cpu 0): release_dirty_pg: log half full
syncing disks... done
my filesets look like this:
# df -k
Filesystem 1024-blocks Used Available Capacity
Mounted on
/dev/vol/rootdg/rootvol 128751 78832 37043 69% /
/proc 0 0 0 100%
/proc
data#nsr 52429056 152873 25460328 1% /nsr
data#kits 52429056 2100795 25460328 8%
/kits
data#transfer 52429056 24508121 25460328 50%
/transfer
/dev/vol/rootdg/vol-rz8g 1007567 833276 73534 92% /usr
data#local 52429056 155573 25460328 1%
/usr/local
data1#sybase 1855048 212081 1636840 12%
/usr/users/sybase
the disks in the LSM volume in question:
rz9 at scsi1 target 1 lun 0 (LID=2) _(DEC RZ1DB-CS (C) DEC 0307)
_(Wide16)
rz10 at scsi1 target 2 lun 0 (LID=3) _(DEC RZ1DB-CS (C) DEC 0307)
_(Wide16)
rz11 at scsi1 target 3 lun 0 (LID=4) _(DEC RZ1DB-CS (C) DEC 0307)
_(Wide16)
rz12 at scsi1 target 4 lun 0 (LID=5) _(DEC RZ1DB-CS (C) DEC 0307) )
_(Wide16)
rz13 at scsi1 target 5 lun 0 (LID=6) _(DEC RZ1DF-CB (C) DEC 0371)
_(Wide16)
rz14 at scsi1 target 6 lun 0 (LID=7) _(DEC RZ1DB-CS (C) DEC 0307)
_(Wide16)
rz13 is the disk I had to change and as you can see the replacement is a
different type. I don't know
whether this would cause a problem or not.
Well, hopefully someone may be able to tell me what's going on here!
Cheers,
Rod
-----------------------------------------------------------------------------
This message is confidential; its contents do not constitute a
commitment by Paribas except where provided for in a written agreement
between you and Paribas. Any unauthorised disclosure, use or
dissemination, either whole or partial, is prohibited. If you are not
the intended recipient of the message, please notify the sender
immediately.
Ce message est confidentiel ; son contenu ne représente en aucun cas un
engagement de la part de Paribas sous réserve de tout accord conclu par
écrit entre vous et Paribas. Toute publication, utilisation ou
diffusion, même partielle, doit être autorisée préalablement. Si vous
n'êtes pas destinataire de ce message, merci d'en avertir immédiatement
l'expéditeur.
Received on Fri Aug 28 1998 - 13:21:24 NZST