Hi,
 
 I still have the following problem:
 
 I am trying to install a DEC Fast EtherWORKS PCI 10/100. 
         System:		DEC Alpha 500/333. 
         Operating Sys:	OSF1 V4.0b (revision 564)
         Firmware:	6.4
 
 I have physically installed the card. 'show config' recognizes both net
 cards, the original at:
         BUS 00 slot 06: DECchip 21040 Network controller ewa0.0.0.6.0
 and the new one at:
         BUS 00 slot 12: DE500-BA Network controller ewb.0.0.0.12.0
 
 The card, lights-up the '100 Mb/s orange LED' and the 'Link status LED'
 blinks - as if it has traffic. But no net activity on the machine...
 
 I have correctly performed the kernel rebuild procedure,  (I know I did
 it right, because I also added a second SCSI controller at the same
 time and the system picked it up immediately) but the DE500-BA was not
 detected and nowhere to be found in the temprary kernel. Upon boot-up
 no indication of a 'tu1'. Only 'tu0' appears.
 
 Has anyone seen this? Is there a patch or a firmware upgrade I need to
 do to get the card to be recognized by genvmunix? Should I just
 manually add the entry:
         controller      tu1        at pci0      slot  12
 
 in the kernel (/sys/conf/<SYSNAME) and rebuild? 
 
 Following I have included my kernel file section. Any help will be
 appreciated. I will summarize.
 
 Thanks!
 
 ====================================
 George Dimitoglou (SAC)
 
 SOHO ESA/NASA Project Scientist Team 
 NASA Goddard Space Flight Center
 Bldg. 26, G-1, Code 682.3
 Greenbelt, MD 20771
 george_at_esa.nascom.nasa.gov
 ====================================
         bus             pci0       at nexus?    
         callout after_c "../bin/mkdata pci"
         bus             isp0       at pci0      slot  9 vector    ispintr 
         controller      scsi0      at isp0      slot  0 
         bus             eisa0      at pci0      slot  10 
         callout after_c "../bin/mkdata eisa"
         controller      ace0       at eisa0     slot  8 vector    aceintr 
         controller      ace1       at eisa0     slot  9 vector    aceintr 
         controller      lp0        at eisa0     slot  10 vector    lpintr 
         controller      fdi0       at eisa0     slot  11 
         device disk     fd0        at fdi0      drive     0 
         controller      gpc0       at eisa0     slot  0 vector    gpcintr 
         bus             isp1       at pci0      slot  11 vector    ispintr 
         controller      scsi1      at isp1      slot  0 
         controller      tu0        at pci0      slot  6 
         controller      tga0       at pci0      slot  8 
 
Received on Tue Jan 27 1998 - 15:58:19 NZDT