Hello Managers,
I have a RA3000 on a DS20e system running TU 5.1.
On channel 0 slots 9 and 10 are configured for RAID1 and the same for slots
8 and 9 on channel 1.
Here is the list of special files :
# file /dev/rdisk/*c
/dev/rdisk/cdrom0c: character special (19/38) EIDE #1 "CD-224E" disk #1
(SCSI ID #0) (SCSI LUN #0) errors = 0/1 offline
/dev/rdisk/dsk0c: character special (19/22) SCSI #0 "BF00963643" disk
#0 (SCSI ID #0) (SCSI LUN #0)
/dev/rdisk/dsk1c: character special (19/54) SCSI #0 "BF00963643" disk
#2 (SCSI ID #1) (SCSI LUN #0)
/dev/rdisk/dsk2c: character special (19/90) SCSI #5 "HSZ22" disk #4 (
SCSI ID #0) (SCSI LUN #0)
/dev/rdisk/dsk3c: character special (19/106) SCSI #5 "HSZ22" disk #5
(SCSI ID #0) (SCSI LUN #1)
I've put a new disk in slot 8 on channel 0 and created a single-device
virtual disk (JBOD) as specified in the Raid Array 3000 for Tru64 UNIX
Installation Guide.
The disk is not seen by the show device command in console mode, but the
hwmgr -show scsi command sees it :
65: 4 system disk none 2 1 dsk2 [5/0/0]
66: 5 system disk none 2 1 dsk3 [5/0/1]
67: 6 system disk none 0 1 (null)
but not the scu show edt :
5 0 0 Direct SCSI-2 DEC HSZ22 (C) DEC d11x W
5 0 1 Direct SCSI-2 DEC HSZ22 (C) DEC d11x W
6 6 0 Sequential SCSI-2 COMPAQ SDT-9000 4.05 N
How to create of special file for this JBOD ?
Thanks adn Regards,
Daniel Clar
Computer Operations Manager
Supelec
France
Received on Tue May 22 2001 - 08:05:24 NZST