Firstly thank you for all of the fast responses from
Matthias, Kris and Corinne at Compaq.
My inelegant solution to the problem was to delete the
UNITS, re-init the containers and add the UNITS back again.
This was not a problem as we had no data on them ... Yet.
Matthias suggested that I upgrade the HBA Firmware which is
a good Idea anyway and I will arrange to get a copy to the
Customer ASAP.
Other sugestions included :
- Check the connections are set to Tru64 and not NT
- Confirm that the host connections are allowed access by
the controller.
- Check zoning configuration
FYI I have included an example of 'show unit' which
indicates the reservation on the device. I am certain this
was set by a Tru Cluster, but still don't understand why
cleanPR does not clear it.
D70 S7
LUN ID: 6000-1FE1-0010-9D50-0009-1070-8013-02F9
NOIDENTIFIER
Switches:
RUN NOWRITE_PROTECT
READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAXIMUM_CACHED_TRANSFER_SIZE = 32
Access:
ALL
State:
ONLINE to this controller
Persistent reserved
NOPREFERRED_PATH
Size: 213343869 blocks
Geometry (C/H/S): ( 41997 / 20 / 254 )
--
This message was sent using ICON i-mail
http://www.icon.co.za/
Received on Wed May 30 2001 - 07:42:04 NZST