Morning all,
I have a DLT8000 device connected to an E40  and can't seem to get it 
right for operation. 
The SRM >> show dev returns:
MZA51800.518.0.2004.1           MZA51800     Compaq DLT8000   0250
Some output from hwmgr:
# hwmgr view dev
 HWID: Device Name          Mfg      Model            Location
 
------------------------------------------------------------------------------
    4: /dev/kevm 
   20: /dev/disk/dsk0c               i2o_bs           iop-0-tid-521
   52: /dev/disk/floppy0c            3.5in floppy     fdi0-unit-0
   57: /dev/disk/cdrom0c    COMPAQ   CRD-8402B        bus-1-targ-0-lun-0
# hwmgr -show scsi
        SCSI   DEVICE            DEVICE      DRIVER NUM  DEVICE FIRST 
 HWID:     DEVICEID     HOSTNAME   TYPE      SUBTYPE OWNER  PATH FILE 
VALID PATH
-------------------------------------------------------------------------
   57:                  1        afcp-dev               cdrom     none 0 
1                                      cdrom0 [1/0/0] 
   58:                  0        afcp-dev               tape         none 
 0      1                                               (null)
Trying a: 
mt -f /dev/ntape/tape*      returns not found
Then when I try :
# cd /dev/ntape
# ls
tape0     tape0_d1  tape0_d3  tape0_d5  tape0_d7  tape4_d1
tape0_d0  tape0_d2  tape0_d4  tape0_d6  tape0c
# mt -f /dev/ntape/tape4_d1 status
devget ioctl failed!
#
The ioctl failure is the only message returned from doing a mt status on 
ALL devices listed in /dev/ntape or /dev/tape   . 
Obviously the tape drive is noticed by the bios, and hwmgr sees it, but 
their isn't a path to the file or scsi id.  In ddr.dbase the drive is 
listed and referenced.  So would I use a "makedev" structure and place it 
in /dev/ntape? 
The tape unit is connected to one of three scsi slots on a single card, 
movement of the cable to each of the three connectors yields no change in 
the above command results. 
Kind of a rough day, now the machine can't find (kernel) vmunix on reboot.
TIA !
Kevin McCarty
CCNP
----------------------------------------------------------------------------------------
This is a PRIVATE message. If you are not the intended recipient, please 
delete without copying and kindly advise us by e-mail of the mistake in 
delivery. NOTE: Regardless of content, this e-mail shall not operate to 
bind CSC to any order or other contract unless pursuant to explicit 
written agreement or government initiative expressly permitting the use of 
e-mail for such purpose.
----------------------------------------------------------------------------------------
Received on Fri Dec 12 2003 - 17:42:33 NZDT