How to see HSZ22

From: Cohen, Andy <Andy.Cohen_at_cognex.com>
Date: Wed, 19 Jan 2005 14:46:16 -0500

We have two alpha servers both running 5.1A PK4. They each have an
RA3000 connected to them. On one of them I can see the HSZ22 fine :
 
scu> show edt
 
CAM Equipment Device Table (EDT) Information:
 
   Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision
N/W
   -------------- ----------- ------ --------- ---------------- --------

---
    0    6    0   Sequential  SCSI-2 DEC       TLZ10    (C) DEC   04a8
N
    1    1    2   Direct      SCSI-2 DEC       HSZ22    (C) DEC   D11W
W
    2    0    0   Direct      SCSI-2 DEC       RZ2ED-LS (C) DEC   0306
W
    2    1    0   Direct      SCSI-2 DEC       RZ2ED-LS (C) DEC   0306
W
    3    0    0   CD-ROM      SCSI-2 COMPAQ    CD-224E            9.5B
N
    7    0    1   Direct      SCSI-2 DEC       HSZ22    (C) DEC   D11W
W  <===
root_at_odin <mailto:root_at_odin> ==> hwmgr -vi dev
HWID: Device Name          Mfg      Model            Location
------------------------------------------------------------------------
------
   3: /dev/dmapi/dmapi
   4: /dev/scp_scsi
   5: /dev/kevm
  46: /dev/disk/floppy0c            3.5in floppy     fdi0-unit-0
  60: /dev/disk/dsk0c      DEC      RZ2ED-LS (C) DEC bus-2-targ-0-lun-0
  61: /dev/disk/cdrom0c    COMPAQ   CD-224E          bus-3-targ-0-lun-0
  62: /dev/ntape/tape0     DEC      TLZ10    (C) DEC bus-0-targ-6-lun-0
  63: /dev/disk/dsk1c      DEC      RZ2ED-LS (C) DEC bus-2-targ-1-lun-0
  64: /dev/disk/dsk2c      DEC      HSZ22    (C) DEC bus-1-targ-1-lun-2
<===
  65: /dev/disk/dsk3c      DEC      HSZ22    (C) DEC bus-7-targ-0-lun-1
<===
 
-- the other one I can't:
 
scu> show edt
 
CAM Equipment Device Table (EDT) Information:
 
   Bus/Target/Lun Device Type  ANSI  Vendor ID    Product ID    Revision
N/W
   -------------- ----------- ------ --------- ---------------- --------
---
    0    0    0   Direct      SCSI-2 DEC       RZ1CB-CS (C) DEC   0656
W
    0    1    0   Direct      SCSI-2 DEC       RZ1DB-CA (C) DEC   LYJ0
W
    0    2    0   Direct      SCSI-2 DEC       RZ1DB-CA (C) DEC   LYJ0
W
    0    3    0   Direct      SCSI-2 DEC       RZ1CF-CF (C) DEC   1614
W
    0    4    0   CD-ROM      SCSI-2 DEC       RRD46   (C) DEC    0557
N
    0    5    0   Sequential  SCSI-2 DEC       TLZ10    (C) DEC   04a8
N
 
root_at_florida <mailto:root_at_florida> ==> hwmgr -vi dev
HWID: Device Name          Mfg      Model            Location
------------------------------------------------------------------------
------
   3: /dev/dmapi/dmapi
   4: /dev/scp_scsi
   5: /dev/kevm
  34: /dev/disk/floppy0c            3.5in floppy     fdi0-unit-0
  40: /dev/disk/dsk0c      DEC      RZ1DB-CA (C) DEC bus-0-targ-1-lun-0
  41: /dev/disk/dsk1c      DEC      RZ1DB-CA (C) DEC bus-0-targ-2-lun-0
  42: /dev/disk/cdrom0c    DEC      RRD46   (C) DEC  bus-0-targ-4-lun-0
  44: /dev/ntape/tape0     DEC      TLZ10    (C) DEC bus-0-targ-5-lun-0
  45: /dev/disk/dsk3c      DEC      RZ1CB-CS (C) DEC bus-0-targ-0-lun-0
  46: /dev/disk/dsk4c      DEC      RZ1CF-CF (C) DEC bus-0-targ-3-lun-0
 
What do I have to do to get the HSZ22 to show up so I can begin using
the disks that are in the RA3K?
 
 
Thanks very much!
Andy
 
Andy Cohen 
Database Systems Administrator 
Cognex Corporation 
1 Vision Drive 
Natick, MA 01760 
508-650-3079 

Received on Wed Jan 19 2005 - 19:49:29 NZDT