Release Note
                      ====================

Celebris GL & Venturis GL Series System BIOS

  Version    :  V1.02

  Date       :  Aug 23 1996

  Files Loc  : 
                BIOS.ROM     - 256K BIOS image file for system rom
                               flashed.
                
                PHLASH.EXE   - flash rom utility,
                PLATFORM.BIN - flash rom utility.

    Signon     :Celebris GL 6180 Version 1.02
                Celebris GL 6200 Version 1.02
                Venturis GL 6180 Version 1.02
                Venturis GL 6200 Version 1.02

        1. Following changes are made to Celebris/Venturis GL BIOS 1.01 to
           generate Celebris/Venturis GL BIOS 1.02 --

           o Default set no MA wait state for 60ns SIMMs, i.e.
             PMC reg58<0> = 0.
             If the 3rd pair of memory banks are embedded, we
             will set the bit later.

           o Modify the range of I/O address of joystick device node
             from 200h-207h to 201h-201h.
             This is for fixing the bug that WIN95 joystick icon shows
             device not connected correctly.
NOTES:
          If you receive an error message during the BIOS PHLASH process
          you may need to set J27 to the enabled the BOOT BLOCK programming.
          To enable BOOT BLOCK programming, locate jumper 27 (Appendix A
          of the System Reference manual) and jumper pins 2-3 ON.

          If you are running windows NT you may need to disable plug & play
          in cmos setup for proper on-board network card operation.