Release Note
                      ====================

Celebris GL & Venturis GL Series System BIOS

  Version    :  V1.03

  Date       :  Nov 18 1996

  Files Loc  : 
                BIOS.ROM     - 256K BIOS image file for system rom
                               flashed.
                
                PHLASH.EXE   - flash rom utility,
                PLATFORM.BIN - flash rom utility.

    Signon     :Celebris GL 6180 Version 1.03
                Celebris GL 6200 Version 1.03
                Venturis GL 6180 Version 1.03
                Venturis GL 6200 Version 1.03

 Note.  BIOS version 1.03 needs to have boot block programming jumper J27
        set to pins 2-3 (enabled). If you run the Crisis Recovery Diskette
        you must set pins 2-3 ON in addition to the other instructions contained
        in the README.TXT.

        1. Following changes are made to Celebris/Venturis GL BIOS 1.02 to
           generate Celebris/Venturis GL BIOS 1.03 --

           o Fix the bug sometimes CPU speed will show 180 but it's really 200.

           o Change "Post Errors" from "Disable" to "Enable" (default).

           o Change the help text of setup\advanced\
             advanced chipset control\USB device
             from "... USB device"
             to   "... USB controller"

           o Change the help text of setup\main\boot options\
             quiet boot
             from "Digiatl"
             to   "Digital"

           o Change the sign on message of post
             from "Copyright (C) 1995 Digital"
             to   "Copyright (C) 1996 Digital"

           o Support dynamic PS2 mouse device in Win95 and fix the QAR#67

           o Pentium Pro Processor Update #37(WW33)
             Machine Check BIOS Changes for Windows NT 4.0 Platforms

           o Change Mouse run-time functions.

           o Change IRQ priority from 9/10,11/... to 10/11/9/....
             for user a chance to locate IRQ9

           o Fix AMIDIAG floppy speed test fail

           o Fix wakeup from suspend mode will go into stdby mode

           o Change "Plug & Play O/S" default from "Disabled" to "Enabled".

NOTES:
          If you receive an error message during the BIOS PHLASH process
          you may need to set J27 to the enabled the BOOT BLOCK programming.
          To enable BOOT BLOCK programming, locate jumper 27 (Appendix A
          of the System Reference manual) and jumper pins 2-3 ON.

          If you are running windows NT you may need to disable plug & play
          in cmos setup for proper on-board network card operation.