Celebris 5xxx BIOS Release Notes
 V2.00
	Creation Date
		22-Mar-94

	Code Base
		Phoenix NuBIOS 4.04
		Celebris Version V1.03

	Checksum
		F9FB

	Signon
		Celebris 560 Version 2.00
		Celebris 575 Version 2.00
		Celebris 590 Version 2.00
		Celebris 5100 Version 2.00

	BIOS Changes
		o Free E-segment of upper memory and about 42K of F-segment.
		o Fixed Password can not be set after soft banner setting.
		o Move KC timer reset routine from ALT+CTRL+DEL hook
		  to user patch hook.
		o Fixed 2940 SCSI adapter configure error.
		o Free Mouse IRQ 12 when disabled.
		o Fixed 3940 SCSI adapter can not find any device.
		o Fixed System POST failure when setup indicates hard disk is present
		  but actually is not there.
		o Fixed Quick lock function always enabled problem.
		o Fixed WordPerfect Office ALT+CTRL+P key sequence problem.
		o Removed system pause when a SCSI card is installed with no devices
		  connected.
		o Fixed problem of DE435 network card not passing internal loop back
		  test of NICDIAG program.
		o Restored a short timeout value when waiting for hard disk
		  suspend response.
		o Free E segment and map its address to ISA slot.
		o Fixed BIOS ROM flash failure after E segment freed by updating
		  PHLASH.INI.
		o Add multi-languages translation for the following POST strings:
		  1. "Press <F2> to enter SETUP "
		  2. "Entering SETUP ...        "
		  3. "Press [SpaceBar] to terminate the memory test"
		  4. "Memory tests terminated by keystroke         "
		o Fixed Mouse and keyboard problem under WINDOWS NT 3.1 when returning
		  from a suspended/off state.
		o Fixed beep after wakes up from power saving mode.
		o Added a piece of code to initialize keyboard controller
		  port 1 in system POST.
		o Fixed DMA problem with NE2000.
		o Removed IDE adapter 0/1 sensitive control in setup
		  utility and modified IDE adapter 1 default setting
		  to ENABLE.
		o Fixed problem of garbage text being displayed on screen when
		  the system does not have a boot device.
		o Fixed system parity error caused by use of a single memory SIMM.
		o Reserved CMOS location 35h for monitor type storage buffer used
		  by SMTR.
		o Fixed corruption of the flash ROM when the custom software banner
		  is used.