CD-INFO.TXT
10 April 97
Driver Version
Driver Windows 95 Windows NT 4.0
______ ---------- --------------
S3 Virge GX Video 3.03.03 1.00.17
PIIX4 IDE Bus Master 2.75 1.75
Crystal CS4236 Audio 1.81 1.51
21143 network 9.99 9.99
The most current drivers and Digital provided applications can be found on:
Internet:
http://www.windows.digital.com
http://www.windows.digital.com/~ftp/00-index.stm
Digital BBS (In the United States)
1-(508)-496-8800
Network Driver Installation
---------------------------
PCI DEC 21143 Driver on Windows 95
-----------------------------------
Windows 95 will automatically load this driver as a Plug and Play device.
Path to driver on the System Software CD \21143\Win95
To install the driver:
1. Click on Device Manager and remove (if present) the existing
Unknown PCI Ethernet Adapter.
2. Restart the system.
3. When PCI Ethernet adapter is detected, load driver from the
System Software CD.
PCI DEC 21143 Driver on WindowsNT 4.0
--------------------------------------
Path to driver on System Software CD \21143\Wnt40
To install the driver:
1. From the Control Panel, select "Network".
2. Select the "Adapter Page".
3. Click "Add" then "Have Disk".
4. Set path to 21143 Network driver on the System Software CD.
5. Select "DEC PCI Fast Ethernet 21143" from OEM option menu.
6. Press "OK".
7. Configure Network settings.
Video Driver Installation
---------------------------
Installing the S3 Virge Video Driver Under Windows95
-----------------------------------------------------
Path to driver on System Software CD \s3\Win95
To install the driver:
1. From the Control Panel, open Display.
2. Click Settings, then click Advanced Properties.
3. Click Change, then click Have Disk.
4. Set path to S3 Virge audio drive on System Software CD
5. Click OK, then click OK again.
6. Select S3 Inc. Virge/DX/GX PCI.
7. Click OK, then click Close.
8. Set Color depth and/or resolution.
9. Click Close.
10 Restart System if prompted.
Installing the S3 Virge Video Driver Under WindowsNT 4.0
---------------------------------------------------------
Path to driver on System Software CD \s3\Wnt40
To install the driver:
1. From Start, click Settings, and then Control Panel.
2. Click Display.
3. From Display Properties, choose Settings tab.
4. From Settings, click Display Type.
5. Click Change, then click Have Disk.
6. Enter the path for S3 Virge on the System Software CD, then click OK.
7. Select S3 Inc. Virge/DX/GX PCI..
8. Click OK, Yes, then OK.
8. Click Close and change color depths and/or resolution.
9. Click Close.
10 Restart System if prompted.
PIIX4 IDE Bus Mastering Driver Installation
------------------------------------
Installing the PIIX4 Driver Under Windows95
-------------------------------------------
Path to driver on System Software CD \Pixide\Win95
To install the driver:
1. Run \piixide\Win95\Piix.exe from the System Software CD.
2. From Start, click Settings, click Control Panel, click System.
3. Click Device Manager.
4. Open Hard Disk Controllers.
5. Remove Standard Dual PCI IDE Controller.
6. Restart System.
7. Click Next from Device Drive Wizard Screen.
8. Click Finish
9. Restart System.
Installing the PIIX4 Driver Under WindowsNT 4.0
------------------------------------------------
Path to driver on System Software CD \Piixide\Wnt40
To install the driver:
1. Run \Piixide\Wnt40\setup from the System Software CD.
to store PIIX4 driver on your hard disk.
2. From Start, click Settings, click Control Panel, click SCSI Adapters.
3. Select Drivers Tab.
4. Click Add.
5. Click Have Disk and set path to PIIX4 driver on your hard disk.
6. Click OK.
7. From the WindowsNT Setup Screen, set path to PIIX4 driver on your hard disk.
8. Click Continue.
9. Restart system.
Audio Driver Installation
-------------------------
Installing the Crystal Audio Driver under Windows95
---------------------------------------------------
Path to driver on System Software CD \Crystal\Win95
To install the driver:
1. Run Setup.exe from the System Software CD
Installing the Crystal Audio Driver under WindowsNt 4.0
-------------------------------------------------------
Path to driver on System Software CD \Crystal\Wnt40
To install the driver:
1. Double click the Multimedia icon in the control panel
and click on the Devices tab.
2. Press the ADD button. Select Unlisted or Updated Drivers
and press OK.
3. A dialog box will appear and request the path of the location
of the driver files. You may search this path by clicking
the BROWSE button.
4. Another dialog box will appear with the CrystalWare Audio Driver
label. Press OK to continue with the installation.
5. If your system BIOS does not support Plug-and-Play, the Business
Audio Setup dialog box will appear and request you to select the
configuration resources.
6. Click on the Restart Now button.
Installing USB for Windows95
----------------------------
Path to driver on System Software CD \Usb
To install the driver:
The PIIX driver must be installed prior installing the USB drivers.
1) Run \Usb\usbsupp.exe from the System Software CD.
System will restart.
2) Run \Usb\usbinf.exe from the System Software CD.
3) From Control Panel, open System`.
4) Open "Device Manager".
5) Open "Other Devices"
6) Remove entry "Universal serial bus controller".
7) Restart System.
Application Installation
------------------------
1. Click on the appropriate executable file, using the
following table for paths.
2. As indicated, some applications are Windows95 applications only.
Application Version OS Path on System Software CD
----------------------------------------------------------------------
Adobe Acrobat 2.1 Windows NT \apps\acrobat\[Language]\Acroread.exe
Reader Windows 95
PCCARE 1.01 Windows 95 \apps\Win95\pccare\disk1\setup.exe
MouseWare 95 2.1 Windows 95 \Mouse\Setup.exe
Desktop Wellness 1.0 Windows NT \apps\Wellness\[language]setup.exe
Windows 95
Alta Vista 1.0a Windows95 \apps\AltaVista\setup.exe
Personal Search Windows NT
ClientWORKS 2.9 Windows95 \app\CW\Setup.exe
WindowsNT
Image Files
-----------
The following diskettes are stored as diskette images:
Windows95 Setup(SR2) w/Toshiba 12X,16X CD ROM driver \images\sr2\tsh16981.exe
Windows95 Setup(SR2) w/TEAC 12X,16X CD ROM driver \images\sr2\teac125.exe
Windows95 Setup(SR2) w/Mitsumi 16X CD ROM driver \images\sr2\mtm155.exe
Intel bootable ICU (v1.23) \images\PnP_123.exe
Adaptec SCSI driver for Windows NT (v1.3) \images\Scsi_nt.exe
Documentation Installation
--------------------------
Documentation installation includes the Readme.txt for your system,
Windows-based on-line help files,
All documentation and help files \help
1. Choose the executable file using the following table for
the path.
Path \help\[Language]\disk1\setup.exe
Creating Diagnostics Diskettes v5.20f
--------------------------------------
Your System Software CD includes the disk images of four Diagnostics
diskettes. Digital recommends that you create Diagnostic diskettes as
soon as possible.
Before beginning, be sure you have four blank 1.44 MB diskettes
available. Then proceed as follows:
If you are a Windows 95 or Windows NT 4.0 user, click on
My Computer on the desktop.
1. Choose your CD-ROM drive.
2. From the CD-ROM drive, locate and run the following executable files
to make the first diskette and second diskette:
\AmiDiag\Amixxxxx.exe (AmiDiag Emergency Use)
\AmiDiag\Env_xxx.exe (Environment)
where:
xxxxx The version number of the AmiDiag Diagnostic
package.
and
XXX The version of the environment
3. Insert your blank diskette and follow the instructions on
the screen.
4. Remove the diskette and label the diskette as the
instructions describe on the screen.
5. Make the third and fourth diskettes, the "Digital Vendor Extended"
diagnostic diskettes by locating the following executable files
\AmiDiag\Xtxxx_1.exe
\AmiDiag\Xtxxx_2.exe
where:
xxx The version number of the Digital Vendor
Extended disk.
6. Repeat step 3 and 4.
You may wish to install the diskettes on your hard disk drive.
Windows NT users have to first create a bootable DOS partition to
install the diskette. You can increase the Diagnostics performance and
functionality by running the program from the hard disk drive.
The first diskette is also useful as an Emergency diagnostic diskette.
Insert the diskette in the diskette drive and power on your system.
For more information, see the Readme.txt file on the Diagnostic
diskettes.