CD-INFO.TXT
Driver Version
Driver Windows 95 WinNT 4.0 WinNT 3.51 Wfw311
______ ---------- --------- ---------- ------
21142/21143 Network 4.16 4.16 4.16 4.16
ESS 1887 Sound 4.03.14 2.00.30 1.60.2 3.11
Matrox Video 3.10.017 2.35.016 2.10.49 1.22.043
Intel PIIX3 IDE X 1.75 1.59 N/A
Adaptec SCSI 1.3 X 1.3 4.0
"X" indicates the driver is bundled with the OS is used.
The most current drivers and Digital provided applications can be found on:
Internet:
http://www.windows.digital.com
http://www.windows.digital.com/~ftp/00-index.stm
Digital BBS (In the United States)
1-(508)-496-8800
Digital Equipment Corporation
20 May 97
Network Driver Installation
---------------------------
PCI DEC 21143 Driver on Windows 95
-----------------------------------
Windows 95 will automatically load this driver as a Plug and Play device.
Path to driver on the System Software CD \21143\ndis3\Win95
To install the driver:
1. Click on Device Manager and remove (if present) the existing
Unknown PCI Ethernet Adapter.
2. Restart the system.
3. When PCI Ethernet adapter is detected, load driver from the
System Software CD.
PCI DEC 21143 Driver on WindowsNT 3.51
--------------------------------------
Path to driver on System Software CD \21143\ndis3\Wnt351
To install the driver:
Use the Microsoft Windows NT documentation
(including on-line help) to help you install your
network drivers and environment.
PCI DEC 21143 Driver on WindowsNT 4.0
--------------------------------------
Path to driver on System Software CD \21143\ndis3\Wnt40
To install the driver:
1. From the Control Panel, select "Network".
2. Select the "Adapter Page".
3. Click "Add" then "Have Disk".
4. Set path to 21143 Network driver on the System Software CD.
5. Select "DEC PCI Fast Ethernet 21143" from OEM option menu.
6. Press "OK".
7. Configure Network settings.
PCI DEC 21143 Driver on Windows for Workgroups
----------------------------------------------------
Path to driver on System Software CD \21143\ndis3\Wfw311
To install the driver:
Instructions for installing this driver can be found in:
\21143\ndis3\Wfw311\install.doc
PIIX3 Bus Mastering Driver Installation
---------------------------------------
(Intel) PIIX3 IDE Driver on Windows95
------------------------------------------
This driver is embedded in Win95 and will be automatically detected
and loaded.
(Intel) PIIX3 IDE Driver on WindowsNT 3.51
-----------------------------------------------
Path to driver on the System Software CD \piixide\Wnt351
To install the driver:
1. From Program Manager, click on Windows NT Setup.
2. From the Windows NT Setup dialog box, select Options and
then ADD/Remove SCSI Adapters.
3. From the SCSI Adapter Setup dialog box, click on the Add and
then OK in response to the message on recovering from a
bad installation.
4. From the Select SCSI Adapter Option dialog box, select
Other (Requires a disk from a hardware manufacturer) and
click OK.
5. At the Insert Diskette dialog box, enter the driver
installation directory and click OK.
6. At the Select OEM Option dialog box, click OK to
accept the driver that is identified.
7. From the Select SCSI Adapter Option dialog box, click
Install.
8. If you receive a message saying the driver is already
on the system, click New and then Continue at the next
dialog box. The driver then installs.
If you do not receive a driver already installed message,
the driver then installs immediately.
A successful installation ends with the return of the SCSI
Adapter Setup dialog box. The box now lists the Bus Master
IDE drive that you just installed.
9. Select Close and then close Windows NT Setup.
(Intel) PIIX3 IDE Driver on WindowsNT 4.0
----------------------------------------------
Path to driver on the System Software CD \piixide\Wnt40
To install the driver:
1. Double click the My Computer icon on the Desktop.
2. Double click the Control Panel icon in My Computer.
3. Double click the SCSI Adapters icon in Control Panel.
4. Select Drivers option in SCSI Adapters and click Add.
5. Click Have Disk in Select SCSI Adapter Driver window.
6. Change path to PIIX3 driver and click OK in Install From Disk window.
7. Choose Intel PIIX PCI Bus Master IDE Controller in Select
Manufacture Driver dialog and click "OK".
8. Click Continue in Windows NT Setup window. If requested to
enter the path to the driver on the System Software CD.
9. Click OK to restart computer in System Setting Change window.
Video Driver Installation
-------------------------
Matrox MGA Millenium on Windows95
---------------------------------
Path to driver on the System Software CD \matrox\Win95\disk1
To install the driver:
1. Run Setup.exe in disk1 on the System Software CD to install
the PowerDesk applet
2. Follow the on screen instructions.
Matrox MGA Millenium on WindowsNT 3.51
--------------------------------------
Path to driver on on the System Software CD \matrox\Wnt351\eng_jpn (English,
Japanese)\I (English,
Francais, Deutsch, Italiano
Espanol)\I2 (English,
Nederlands, Svenska, Norsk,
Portugues)
To install the driver:
1. Click on Control Panel.
2. From Control Panel, click on Display.
3. From Display Settings dialog box, click on Change Display
Type.
4. From Display Type dialog box, click on Change.
5. From Select Device dialog box, click on Other.
6. Enter the full path to the video driver on your on the System
Software CD and click OK.
NOTE: You must choose a language combination.
Select a combination that includes the language you
are using for your system as your selection determines
the language of the accompanying video application.
The video application installs along with the Matrox
video driver.
7. From Select Device dialog box, set path to driver on the
System Software CD and click Install:
8. Click Yes at Installing Driver dialog box and Continue at
Windows NT Setup dialog box.
The driver installs and you should click OK at the
next two dialog boxes.
Matrox MGA Millenium on WindowsNT 4.0
--------------------------------------
Path to driver on the System Software CD \matrox\Wnt40\disk1
To install the driver:
1. Run Setup.exe in disk1 on the System Software CD to install
the PowerDesk applet
2. Follow the on screen instructions.
Matrox MGA Millenium on Windows for Workgroups 311
--------------------------------------
Path to driver on the System Software CD \matrox\wfw311\setup.exe
To install the driver:
1. Run setup.exe to install driver.
2. Follow instructions.
Additional instructions can be found in: \matrox\wfw311\readme
Audio Driver Installation
-------------------------
ESS 1887 Audio driver for Windows95
-----------------------------------
Windows 95 will automatically load this driver as a Plug and Play device.
Path to driver on the System Software CD \ess1887\Win95
To install driver:
1. Remove (if present) the ES1688 Audio driver
2. Restart your system.
3. When Windows95 Plug and Play detects an unknown device, select the
path to the ESS1887 audio driver and select the ES1887 Plug and Play
Audio Driver.
Default settings:
Field Setting
______________________________________
Capture DMA 1
Capture IRQ 5
MPU401 I/O Address 310
Playback DMA 5
Capture IRQ 11 (1888 Only)
ESS 1887 Audio driver for Windows NT3.51 and 4.0
------------------------------------------------
Path to driver on the System Software CD \ess1887\Wnt351
To install driver:
1. Click on Control Panel.
2. Click on Drivers.
Go to Step 4.
Path to driver on the System Software CD \ess\1887\Wnt40
To install driver:
1. Click on Control Panel.
2. Click on Multimedia
3. Click on Audio Devices.
4. Click on Add.
5. Select Unlisted or Updated Driver and click OK.
6. From the Install Driver dialog box, enter the full pathname
to ESS1887 sound driver on the backup CD, and click OK.
7. Click OK in response to the Add Unlisted or Updated Driver
dialog box.
If you receive Driver Exists dialog box, click New.
Otherwise, go to step 8.
8. Enter I/O Address 220 and click Continue.
9. At the ESS1887 Configuration dialog box enter the settings as
follows and then click OK:
Field Setting
______________________________________
Capture DMA 1
Capture IRQ 5
MPU401 I/O Address 310
Playback DMA 5
Capture IRQ 11 (1888 Only)
ESS 1887 Audio driver for Windows for Workgroups 3.11
----------------------------------------------------
Path to driver on the System Software CD \ess1887\Wfw311
To install driver:
1. Run Setup.exe fron the System Software CD
2. Follow Instructions.
Capture DMA 1
Capture IRQ 5
Playback DMA 5
Capture IRQ 11
Adaptec SCSI Controller
------------------------
Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller for Windows95
-------------------------------------------------------------
Path to driver on the System Software CD \Adaptec\Win95
To install driver:
1. Click on PCI SCSI Controller from Other Devices in
Device Manager.
2. Click Properties.
3. Select Driver Tab.
4. Click Change then Have Disk.
5. Set path to \Adaptec\Win95 on the System Software CD.
6. Click OK.
7. Select Show all devices.
8. Select Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller
for Windows.
9. Select OK.
Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller for WindowsNT 4.0
------------------------------------------------------------------
This driver is embedded in WindowsNT 4.0
Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller for Windows for Workgroups 3.11
--------------------------------------------------------------------------------
Path to driver on the System Software CD \Adaptec\Wfw311
To install driver:
This driver is stored as a self-extracting diskette image.
WindowsNT 4.00 Service Pack 2
-----------------------------
To correct a system hang problem during periods of high processor
activity on multiprocessor systems, Windows NT 4.00 Service Pack 2
must be installed.
Details regarding this problem can be found at the following
web address:
http://www.microsoft.com/kb/articles/q159/1/11.htm
WindowsNT 4.00 Service Pack 2 can be obtained from Microsoft.
Installing USB for Windows95
----------------------------
Path to driver on System Software CD \Usb
To install the driver:
The PIIX driver must be installed prior installing the USB drivers.
1) Run \Usb\usbsupp.exe from the System Software CD.
System will restart.
2) Run \Usb\usbinf.exe from the System Software CD.
3) From Control Panel, open System`.
4) Open "Device Manager".
5) Open "Other Devices"
6) Remove entry "Universal serial bus controller".
7) Restart System.
Application Installation
------------------------
1. Click on the appropriate executable file, using the
following table for paths.
2. As indicated, some applications are Windows95 applications only.
Application Version OS Path on System Software CD
----------------------------------------------------------------------
ClientWorks 2.3d Windows NT \apps\cw\disk1\setup.exe
Windows 95
Adobe Acrobat 2.1 Windows NT \apps\acrobat\[Language]\Acroread.exe
Reader Windows 95
Windows for Workgroups 3.11
PCCARE 1.12A Windows 95 \apps\Win95\pccare\disk1\setup.exe
MouseWare 95 2.1 Windows 95 \Mouse\Setup.exe
Desktop Wellness 1.0 Windows NT \apps\Wellness\[Language]\setup.exe
Windows 95
Windows for Workgroups 3.11
Alta Vista 1.0a Windows95 \apps\AltaVist\setup.exe
Personal Search Windows NT
Image Files
-----------
The following diskettes are stored as diskette images:
Windows95 Setup(SR1) w/Toshiba 8X,12X CD ROM driver \images\sr1\taisatap.exe
Windows95 Setup(SR1) w/GoldStar 8X CD ROM driver \images\sr1\gs124.exe
Windows95 Setup(SR1) w/TEAC 12X CD ROM driver \images\sr1\teac_cdi.exe
Windows95 Setup(SR2) w/Toshiba 8X,12X CD ROM driver \images\sr2\taisatap.exe
Windows95 Setup(SR2) w/GoldStar 8X CD ROM driver \images\sr2\gs124.exe
Windows95 Setup(SR2) w/TEAC 12X CD ROM driver \images\sr2\teac_cdi.exe
Intel bootable ICU (v1.23) \images\PnP_123.exe
Adaptec SCSI driver for Windows NT (v1.3) \images\Scsi_nt.exe
SR1 and SR2 indicate Service Release 1 and 2 respectively.
Documentation Installation
--------------------------
Documentation installation includes the Readme.txt for your system,
Windows-based on-line help files,
All documentation and help files \help\GL or \Help\GL-2
1. Choose the executable file using the following table for
the path.
Path \help\GL\[Language]\disk1\setup.exe
or
\help\GL-2\[Language]\disk1\setup.exe
The documentation files in the folder Help_DP pertain to the Celebris GL
Dual Processor.
Creating Diagnostics Diskettes v5.20f
-------------------------------------
Your System Software CD includes the disk images of five Diagnostics
diskettes. Digital recommends that you create Diagnostic diskettes as
soon as possible.
Before beginning, be sure you have five blank 1.44 MB diskettes
available. Then proceed as follows:
1. If you are a Windows NT 3.51 user, from Program Manager,
click on File Manager.
If you are a Windows 95 or Windows NT 4.0 user, click on
My Computer on the desktop.
2. Choose your CD-ROM drive.
3. From the CD-ROM drive, locate and run the following executable files
to make the first diskette and second diskette:
\AmiDiag\Amixxxxx.exe (AmiDiag Emergency Use)
\AmiDiag\Env_xxx.exe (Environment)
where:
xxxxx The version number of the AmiDiag Diagnostic
package.
and
XXX The version of the environment
4. Insert your blank diskette and follow the instructions on
the screen.
5. Remove the diskette and label the diskette as the
instructions discribe on the screen.
6. Make the third and fourth diskettes, the "Digital Vendor Extended"
diagnostic diskettes by locating the following executable files
\AmiDiag\Xtxxx_1.exe
\AmiDiag\Xtxxx_2.exe
\AmiDiag\Xtxxx_3.exe
where:
xxx The version number of the Digital Vendor
Extended disk.
7. Repeat step 4 and 5.
You may wish to install the diskettes on your hard disk drive.
Windows NT users have to first create a bootable DOS partition to
install the diskette. You can increase the Diagnostics performance and
functionality by running the program from the hard disk drive.
The first diskette is also useful as an Emergency diagnostic diskette.
Insert the diskette in the diskette drive and power on your system.
For more information, see the Readme.txt file on the Diagnostic
diskettes.