DIGITAL: Environment->Thermal Sensors

Description:
------------
The Thermal Sensors menu entry displays values from the selected object's thermal 
sensors.  The following fields are displayed:

Index - A unique enumeration identifying each sensor.

Description - The location of the sensor.

Reading - The sensors current value, expressed in the units indicated by the 
setting of the Units field.  This reading is not available on all types of 
hosts.

Units - Units in which the Reading field may be expressed.  Possible values are:
	Unknown
	Other
	degreesF - Fahrenheit
	degreesC - Celsius
	tempRelative

Status - The current status of the sensor.  Possible values are:
	Unknown
	Low
	LowWarning
	HighWarning
	High
	OK
	Other

Low Threshold - The default value for the low temperature threshold.

High Threshold - The default value for the high temperature threshold.

Shutdown Soon Threshold - The default value for the shutdown soon threshold.

Shutdown Now Threshold - The default value for the shutdown now threshold.

Units - Units in which the threshold fields may be expressed.  Values are the 
same as the Units field above.

MIB Variables:
--------------

Index -                   .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.1
Description -             .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.2
Reading -                 .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.3
Units -                   .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.4
Status -                  .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.10
Low Threshold -           .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.5
High Threshold -          .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.6
Shutdown Soon Threshold - .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.7
Shutdown Now Threshold -  .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.8
Units -                   .1.3.6.1.4.1.36.2.18.22.1.8.1.2.1.9

Troubleshooting:
----------------

"Warning:  no information returned for query" - There are two possible reasons
for this message.  First, the selected object does not have a Digital SNMP agent
running.  Second, the selected object's SNMP agent does not support these
particular MIB variables.

"Cannot get SNMP table.  No response arrived before timeout" - This message
means that the request was not returned from the selected object's SNMP agent.
Possibly the SNMP agent is not running or this system is inaccessible.
