DIGITAL: Memory->Components

Description:
------------

The Components menu entry displays information about the selected hosts memory 
components.  The following information is displayed:

Index - Index of the entry.

Type - The type of memory.  The possible values are:
	Unknown
	Other
	systemMemory
	shadowMemory
	videoMemory
	flashMemory
	nvram
	expansionRam
	expansionROM

KBytes - Size of the memory component in Kilobytes.

Location - Location of the memory component..1.3.6.1.4.1.36.2.18.22.1.4.5.1

EDC Type - The type of error detection and correction provided for memory 
contained on or controlled by this component.  Possible values are:
	Unknown
	Other
	None
	Parity
	singleBitECC
	multiBitECC

Slots - Total number of slots for removeable memory.

Slots Used - Total number of slots occupied by removeable memory.  0 if unknown.

Start Address - 64-bit starting address of memory contained on or controlled by 
this component

MIB Variables:
--------------

Index - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.1
Type - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.2
KBytes - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.3
Location - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.5
EDC Type - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.6
Slots - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.7
Slots Used - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.8
Start Address - .1.3.6.1.4.1.36.2.18.22.1.4.5.1.4

Troubleshooting:
----------------

"Warning:  no information returned for query" - There are two possible reasons
for this message.  First, the selected object does not have a Digital SNMP agent
running.  Second, the selected object's SNMP agent does not support these
particular MIB variables.

"Cannot get SNMP table.  No response arrived before timeout" - This message
means that the request was not returned from the selected object's SNMP agent.
Possibly the SNMP agent is not running or this system is inaccessible.
