 
Getting Started



                          HP OpenVMS
   Layered Products Library, Operating Environment Update, 
    Online Documentation Libraries, and HP Services Tools
                             for
              HP OpenVMS on HP Integrity Servers 



Welcome to the Layered Products Library, Operating Environment 
Update, and Online Documentation Libraries for OpenVMS on 
Integrity Servers, and the Services Tools CD.  The following 
consolidated software is included with the HP OpenVMS Operating 
Environment media:


*  Layered Products Library
   o  Contains the latest revision of all software products 
      included on the Layered Products Library media.

*  Operating Environment Update
   o  Contains the latest revision of the Operating Environment 
      software products that have revised since the last 
      Operating System version release. 

*  Online Documentation Libraries
   o  Contains the latest revision of online documentation for 
      all software products included in the Operating Environment 
      and Layered Products Library media.

   
For new customers, these DVD and CD-ROMs are included with the 
Operating Environment Media.  

A Master Index, listing the contents of each DVD/CD-ROM, as well 
as identifying those products that are new, updating, or removed, 
can be found in the [README] directory on the media.  The Master 
Indexes are also posted at the following website: 
http://www.hp.com/software/SPL.



5991-6685 













Software Updates Service
For OpenVMS on Integrity, SW Updates Service is purchased for the 
Operating Environment media, and for each individual layered product 
media.  All updates are delivered on the consolidated software 
distribution media mentioned above.     

Software Updates Service for license products provides the License 
to Use new revisions of the software released during the Support 
Agreement period.



Licensing Information	
Customers must be licensed to use all new revisions of software 
products released on the consolidated software distribution for 
OpenVMS on Integrity servers.  If a customer does not have a 
Support Agreement that includes Software Updates Service, the 
purchase of a new product license is required.  

Additional licensing information is available here:
 
http://licensing.hp.com/swl/view.slm?page=index























   HP OpenVMS Layered Products Library and Operating Environment 
                               Update


This section provides getting started instructions for the Layered 
Products Library and the Operating Environment Update.


1.  Mounting the media for the Layered Products Library or 
    Operating Environment Update.

    Mount the DVD/CD-ROM by entering the MOUNT command in the  
    following format: 

    $ MOUNT/SYSTEM device volumelabel	Where device is the name 
    of the media device, volume label is the 12-character 
    volume label located on the face of the disc.
       
    Example:

    $ MOUNT/SYSTEM DQA400: I64BINMAR061


2.  Accessing a Software DVD/CD-ROM 

    Products on the Layered Products Library and Operating 
    Environment Update DVD/CD-ROM contain directories for each 
    product.  These directories contain save sets of the binary 
    images included in the software product and product 
    installation documentation in ASCII text and PostScript 
    formats.  Each product directory begins with a name unique
    for that product.
 
    Table 2-1 shows the structure of the Layered Products Library 
    and Operating Environment Update DVD/CD-ROM. 
 
    The [README] directory, located on the first CD-ROM or DVD, 
    contains the documents you should read first. 

    For each product, the name of the root directory usually 
    corresponds to the name of the product save set.  The product 
    save sets are located in the KIT subdirectory.  Documentation 
    is located in the DOCUMENTATION subdirectory.







Table 2-1  Layered Products Library and Operating Environment 
           Update Media Directory Structure 


----------------------------------------------------------------------
Directory          File                            Contents     
----------------------------------------------------------------------
[README]                                 Documentation you should
                                         read first.
----------------------------------------------------------------------
             CDMASTER_INDEX.TXT          Lists all products in this
                                         release, including which DVD/
                                         CD-ROM contains each product
                                         and the directory name for
                                         each product.    
----------------------------------------------------------------------
             GETTING_STARTED.TXT         Includes instructions to
                                         mount media, accessing
                                         software and documents,
                                         print documents, and
                                         install layered products.
----------------------------------------------------------------------
             SW_COMPAT_MATRIX.TXT        Indicates operating system
                                         versions that support each
                                         layered product.  (This is
                                         for future OS releases.)
----------------------------------------------------------------------
[product]                                Top level product directory,
                                         as shown in the OpenVMS for
                                         Integrity Server Layered
                                         Products Library and OE
                                         Update for OpenVMS I64 
                                         Master Indexes.
----------------------------------------------------------------------
   [product.KIT]                         Product subdirectory
                                         containing save sets 
                                         and/or PCSI files.
----------------------------------------------------------------------
   [product.DOCUMENTATION]               Product subdirectory
                                         containing documentation
                                         in .PS and .TXT formats.
----------------------------------------------------------------------
             product_COVER.TXT           Cover letters
----------------------------------------------------------------------
             product_IGUIDE.TXT          Installation guides
----------------------------------------------------------------------
             product_SPD.TXT             Software Product Descriptions
----------------------------------------------------------------------


3.  Release Notes and Other Documentation  
 
    Release notes for layered products are included in the kits and 
    may be retrieved by entering the appropriate command in the 
    VMSINSTAL utility or the POLYCENTER Software Installation 
    utility. 

    Other product documentation, not listed in Table 2-1, is 
    available in two ways: 
 
      On the HP OpenVMS Online Documentation Library for HP OpenVMS 
       on HP Integrity Servers and Microsoft[TM] Windows[TM] 
       Platforms CD-ROM, in an electronically viewable format, 
      As individual product documentation sets in hardcopy format. 
 
    Either may be ordered separately by contacting your HP account 
    representative.  

    Order numbers for software kits, printed manuals, and software 
    service are included in product cover letters or are listed on 
    the SPDs.


4.  Printing the Documents

    You can print the documentation for the Layered Products Library 
    or Operating Environment Update by entering an operating system 
    command.  You do not need a product license to print these 
    documents. 
 
    See the Layered Products Library or the Operating Environment 
    Update Master Index for pointers to product directory 
    specifications. 

    To print a document in Table 2-1 with text output, send the file 
    to an ASCII printer by entering a command in one of the following 
    formats: 
 
    $ PRINT/QUEUE=queue_ANSI device:[README]file-name.TXT 
    $ PRINT/QUEUE=queue_ANSI device:[product.DOCUMENTATION]file-
      name.TXT
 
    To print a document from the [product.DOCUMENTATION] directory 
    with PostScript output, send the file to a PostScript printer by 
    entering the command in the following format: 
 
    $ PRINT/QUEUE=queue_POST device:[product.DOCUMENTATION]file-
      name.PS




    In the preceding examples, device represents the name of the 
    drive on which you have placed your Layered Products Library 
    or Operating Environment Update DVD/CD-ROM.


5.  Installing Layered Products
 
    This section describes how to install layered products on an 
    OpenVMS on Integrity Servers system.        

5.1  Location of Product Save Sets and Installation Instructions

     The Layered Products Library or the Operating Environment Update 
     Master Index gives the directory locations of the products on
     the software binaries DVD or CD-ROM. This information is also 
     available in the CDMASTER_INDEX.TXT files in the [README] 
     directory on the first disc. 

     Installation information for each product, in ASCII text and 
     PostScript formats, is located in the [product.DOCUMENTATION] 
     directories, where product is the product directory name as  
     given in the Layered Products Library or Operating Environment  
     Update Master Index.

5.2  Installation Methods

     Install layered products using one of the following methods: 
 
       Using the VMSINSTAL utility. 
       Using the POLYCENTER Software Installation utility.

5.2.1  Using VMSINSTAL

       Individual layered product kits are located in their own 
       directory hierarchies.  For this   reason, when you install 
       a layered product, you must use a VMSINSTAL command line that 
       is slightly different from the one given in the product's 
       installation guide.

       When you enter the VMSINSTAL command line, specify the 
       disc drive and the directory by entering a command in the  
       following format:
 
       @SYS$UPDATE:VMSINSTAL product drive:[directory.KIT]
 
       For example:
 
       $ @SYS$UPDATE:VMSINSTAL DECFMS024 DQA400:[DECFMS024.KIT] 
 


       Additionally, certain system privileges must be enabled 
       before you run VMSINSTAL. You must be logged in to a 
       privileged account (such as the system manager's account, 
       SYSTEM) that has the SETPRV privilege or at least the 
       following privileges enabled:
 
         CMKRNL 
         SYSPRV 
         WORLD
 
       To check whether your process has SETPRV or other privileges 
       enabled, enter the following command:
 
       $ SHOW PROCESS/PRIVILEGES 

5.2.2  Using the POLYCENTER Software Installation Utility
 
       Beginning with OpenVMS Alpha Version 6.1, some products can be 
       installed using the POLYCENTER Software Installation utility.  
       Not all products are available with this installation 
       technology.  

       Use a command in the following format to install one or more 
       software products that support installations by means of 
       POLYCENTER Software Installation utility: 
 
       $ PRODUCT INSTALL product/VERSION=number /SOURCE=disc- 
         drive:[directory.KIT]

       For example:
 
       $ PRODUCT INSTALL DQS/VERSION=1.3   /SOURCE=DQA400:[DQS013.KIT]

       Additionally, certain system privileges must be enabled before 
       you install products. You must be logged in to a privileged 
       account (such as the system manager's account, SYSTEM) that  
       has at least the following privileges enabled: 
 
         CMKRNL 
         SYSLCK 
         SYSPRV 
 
       To check whether your process has these privileges enabled, 
       enter the following command:
 
       $ SHOW PROCESS/PRIVILEGES 
 
 



       To see whether a previous version of a product is installed, 
       use the PRODUCT SHOW PRODUCT command. For example:
 
       $ PRODUCT SHOW PRODUCT FORTRAN

       Refer to the product's installation guide for more information 
       on installing products using the POLYCENTER Software 
       Installation utility. 
 
       To use other features of the POLYCENTER Software Installation 
       utility, see the POLYCENTER Software Installation Utility 
       User's Guide.







































        HP OpenVMS Online Documentation Libraries (ODL) for 
      Layered Products on HP Integrity Servers and Operating 
              Environments on Integrity/Alpha Servers 


This section provides introductory information about the Online 
Documentation Libraries CD-ROM collection.  It provides general and 
platform-specific installation and user information for the ODL.

These OpenVMS CD-ROMs are ISO 9660 Level 2 (ODL-ISO) compliant 
CD-ROMs that can be run from Microsoft Windows and OpenVMS platforms.

These discs contain documentation in HTML and PDF format, and use 
HTML pages as the navigation mechanism to browse to and display 
documents.  A search engine is also included for full text searching 
(Windows platforms only).


System Requirements

*  OpenVMS on Integrity, Version 8.2 or later
*  Windows 98 SE, Windows NT, Windows 2000, or Windows XP
*  Web Browser
*  Adobe Acrobat Reader
*  Java 2 Standard Edition (J2SE), 1.3 or later (Windows platforms)


Mounting an ODL-ISO CD-ROM:

Windows Platforms:

*  Insert the ODL-ISO disc into your CD-ROM drive

OpenVMS Platforms:

*  $ MOUNT/OVER=ID/MEDIA_FORMAT=CDROM/UNDEFINED_FAT=(STREAM:2048) 
     DEVICE: 


Browsing an ODL-ISO 

To begin browsing an ODL-ISO CD-ROM, open index.htm from the root 
of the CD-ROM in your web browser.

For a listing of products available on this CD-ROM, open PRODLIST.HTM 
from the /ODLDOC folder on the CD-ROM or click on the link from 
CONTENTS.HTM. 



Searching ODL-ISO (Windows platforms only)

The main ODL page should display and the ASTAware SearchDisc search 
engine should launch when the disc is inserted into the drive.  If 
it does not, run the SDWinjava.bat file from the root of the CD-ROM.  
The ASTAware SearchDisc icon should appear in your taskbar when the 
search engine is running.

You can enter a search query in the search box from any ODL 
navigation page on the CD-ROM.

**IMPORTANT**  You must shut down the search engine by clicking the 
SearchDisc icon in your taskbar, before you eject the CD-ROM from 
your drive.  This should also be done before putting in another 
CD-ROM to search.


Configuring ODL-ISO Search for a Hard Drive (Windows Platforms Only)

If you choose to copy the ODL-ISO CD-ROM content to a hard drive on a 
Windows platform, you will need to reconfigure the search engine to 
retrieve search results from the new location. 

*  Copy the entire CD-ROM to an area on a hard drive.  For example, 
   C:\ODL

*  Run MediaSwitcher.exe from the area you copied the CD-ROM to.  
   This will reconfigure the search engine to search and retrieve 
   search results from the new ODL-ISO location.  This executable
   is located at the root of the CD-ROM.

   Note:  Be sure that the search engine is shut down before 
          proceeding.  To shut the search engine down, click on the 
          SearchDisc icon in your taskbar, and click yes when asked 
          if you would like to shut down the search engine.

*  Enter the path where you copied your ODL CD-ROM to in the "Select 
   the SearchDisc Installation Folder" box.  
   For example, if you copied the CD-ROM to your C: drive in a folder 
   named ODL, enter C:\ODL here.  Click Next.

*  Enter the path again where you copied your ODL CD-ROM to in the 
   "Select the Search Documents Folder" box.  Click Install.

*  Restart the search engine by starting autolaunch.exe from the new 
   location.  






Known Issue:  The installer used for the Media Switch Utility, 
              described above, is not currently supported for all 
              language settings.   If your language is not supported, 
              you will receive an error stating, "Installer User 
              Interface Mode Not Supported," when attempting to run 
	      MediaSwitcher.exe from the root of the ODL collection 
              on your hard drive.  

You can use either of the following workarounds to address this:

Create a network drive of the directory where the ODL CD-ROM was 
copied to, making it appear as a virtual drive.  From there, open 
autolaunch.exe.

Temporarily change your regional settings on your computer to US 
English, run the MediaSwitcher.exe, then change the settings back 
to your original settings. 



































			HP Services Tools CD


The Services Tools CD that is included with the OpenVMS on Integrity 
Servers distribution contains analysis, diagnosis and remote support 
software, for example WEBES and ISEE, for use by HPs service 
engineers and HPs Authorized Service Provider service engineers.  
The software and associated documentation on this CD are for use on 
systems that have hardware warranty, a service contract, or service 
obligation.
 
The Services Tools CD and associated web pages may contain new 
diagnosis software that is applicable to the system and should be 
reviewed for the most recent updates to the diagnosis tools.   
http://h18000.www1.hp.com/support/svctools/index.html 


Mounting instructions for the CD-ROM are as follows:

OpenVMS: 

$ mount/over=id/media_format=cdrom/undefined_fat=(stream:2048)    
  device_name:

Windows NT:

Insert CD-ROM into drive.



The HP Services Tools software, including associated documentation, 
is the property of and contains confidential technology of 
Hewlett-Packard Company or its affiliates.  Service customer is 
hereby licensed to use the software only for activities specified 
in the Exhibit SS5, and HP Terms and Conditions of Sale and Services, 
HP Business Terms or HP Global Agreement and only during the term of 
the applicable support delivered by HP or its authorized service 
provider. Customer may not modify or reverse engineer, remove, or 
transfer the software or make the software or any resultant diagnosis 
or system management data available to other parties without HP's or 
its authorized service provider's consent. Upon termination or 
expiration of the services, customer will, at HP's or its service 
provider's option, destroy or return the software and associated 
documentation in its possession. 








Your Feedback Is Appreciated

If you have questions or concerns regarding the Layered Products 
Library, the Operating Environment Update, or the Online 
Documentation Library, please contact us at:

SPLsupport@ACLabs.com

Please note questions regarding individual product performance 
should continue to be worked through your local support team.













 2006 Hewlett-Packard Development Company, L.P. The information 
  contained herein is subject to change without notice. The only 
  warranties for HP products and services are set forth in the 
  express warranty statements accompanying such products and 
  services.  Nothing herein should be construed as constituting 
  an additional warranty or condition, express or implied, in 
  fact or in law. HP shall not be liable for technical or 
  editorial errors or omissions contained herein. 

Microsoft, Windows and NT are registered trademarks of Microsoft 
Corporation in the United States and/or other countries.
 


