HP OpenVMS systems documentation

When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, the user is forced to change the password (unless you specify /FLAGS=DISFORCE_PWD_CHANGE).

Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive.

/PBYTLM

/PGFLQUOTA=value

If decompressing libraries, make sure to set PGFLQUOTA to twice the size of the library.

/PRCLM=value

/PRIMEDAYS=([NO]day[,...])

By default, primary days are Monday through Friday and secondary days are Saturday and Sunday. If you omit a day from the list, AUTHORIZE uses the default value. (For example, if you omit Monday from the list, AUTHORIZE defines Monday as a primary day.)

Use the primary and secondary day definitions in conjunction with such qualifiers as /ACCESS, /INTERACTIVE, and /BATCH.

/PRIORITY=value

/PRIVILEGES=([NO]privname[,...])

/PWDEXPIRED (default)

/NOPWDEXPIRED

/PWDLIFETIME=time (default)

/NOPWDLIFETIME

To prevent a password from expiring, specify the time as NONE. By default, a password expires in 90 days.

/PWDMINIMUM=value

/QUEPRIO=value

/REMOTE[=(range[,...])]

/SHRFILLM=value

/TQELM

/UIC=value

Each user must have a unique UIC. By default, the UIC value is [200,200].

/WSDEFAULT=value

The value cannot be greater than WSMAX. This quota value replaces smaller values of PQL_MWSDEFAULT.

/WSEXTENT=value

The value is an integer equal to or greater than WSQUOTA. By default, the value is 1024 pages on VAX systems and 16384 pagelets on Alpha and I64 systems. The value cannot be greater than WSMAX. This quota value replaces smaller values of PQL_MWSEXTENT.

/WSQUOTA=value

The value cannot be greater than the value of WSMAX and cannot exceed 8,192 pagelets on Alpha and I64 systems. This quota value replaces smaller values of PQL_MWSQUOTA.

Description

Modify the DEFAULT record when qualifiers normally assigned to a new user differ from the HP-supplied values. The following qualifiers correspond to fields in the default record that are commonly modified:

Qualifier	Reason for Modification
/CLI	Specifies the default Command Line Interpreter to be used for this user. (Most OpenVMS users use the DCL command interpreter.)
/DEVICE	If most users have the same default login device, allows you to specify a default login device for newly-created users. The use of a logical name is recommended.
/LGICMD	Specifies the filename of a command procedure to be invoked during the login of the user. OpenVMS first looks for a systemwide login command procedure, using the systemwide logical name SYS$SYLOGIN. If this logical name successfully translates to a valid file specification, the command interpreter invokes the resulting command procedure during login. If the file specification does not include a file extension, the command interpreter applies a default value that is specific to that command interpreter. In the case of the DCL interpreter, the default file extension is .COM. OpenVMS then looks for a LGICMD specification. If it finds this specification, OpenVMS invokes the command procedure. If the LGICMD specification does not include a file extension, the current command interpreter applies a default value. In the case of the DCL interpreter, the default file extension is .COM. You can disable or override the command procedure invocation during login by specifying qualifiers such as /NOCOMMAND or /LGICMD at the login username prompt. Also see the CAPTIVE and RESTRICTED flags.
/PRIVILEGES	When users are given different privileges than those supplied by HP.
Quota qualifiers	When the default quotas are insufficient or inappropriate for mainstream work.

Example

UAF> DEFAULT /DEVICE=SYS$USER/LGICMD=SYS$MANAGER:SECURELGN -
_UAF> /PRIVILEGES=(TMPMBX,GRPNAM,GROUP)
%UAF-I-MDFYMSG, user record(s) updated
      

The command in this example modifies the DEFAULT record, changing the default device, default login command file, and default privileges.

EXIT

Enables you to exit from AUTHORIZE and return to DCL command level. You can also return to command level by pressing Ctrl/Z.

Format

EXIT

Parameters

None.

Qualifiers

None.

GRANT/IDENTIFIER

Assigns the specified identifier to the user and documents the user as a holder of the identifier in the rights database.

Format

GRANT/IDENTIFIER id-name user-spec

Parameters

id-name

Specifies the identifier name. The identifier name is a string of 1 to 31 alphanumeric characters that can contain underscores and dollar signs. The name must contain at least one nonnumeric character.

user-spec

Specifies the UIC identifier that uniquely identifies the user on the system. This type of identifier appears in alphanumeric format. For example: [GROUP1,JONES].

Qualifier

/ATTRIBUTES=(keyword[,...])

Specifies attributes to be associated with the identifier. The following are valid keywords:

DYNAMIC	Allows unprivileged holders of the identifier to remove and to restore the identifier from the process rights list by using the DCL command SET RIGHTS_LIST.
HOLDER_HIDDEN	Prevents people from getting a list of users who hold an identifier, unless they own the identifier themselves.
NAME_HIDDEN	Allows holders of an identifier to have it translated, either from binary to ASCII or from ASCII to binary, but prevents unauthorized users from translating the identifier.
NOACCESS	Makes any access rights of the identifier null and void. If a user is granted an identifier with the No Access attribute, that identifier has no effect on the user's access rights to objects. This attribute is a modifier for an identifier with the Resource or Subsystem attribute.
RESOURCE	Allows holders of an identifier to charge disk space to the identifier. Used only for file objects.
SUBSYSTEM	Allows holders of the identifier to create and maintain protected subsystems by assigning the Subsystem ACE to the application images in the subsystem. Used only for file objects.

To remove an attribute from the identifier, add a NO prefix to the attribute keyword. For example, to remove the Resource attribute, specify /ATTRIBUTES=NORESOURCE.

Example

UAF> GRANT/IDENTIFIER INVENTORY [300,015]
%UAF-I-GRANTMSG, identifier INVENTORY granted to CRAMER
      

The command in this example grants the identifier INVENTORY to the user named Cramer who has UIC [300,015]. Cramer becomes the holder of the identifier and any resources associated with it. The following command produces the same result:

UAF> GRANT/IDENTIFIER INVENTORY CRAMER

HELP

Displays information concerning the use of AUTHORIZE, including formats and explanations of commands, parameters, and qualifiers.

Format

HELP [keyword[,...]]

Parameter

keyword[,...]

Specifies one or more keywords that refer to the topic, command, qualifier, or parameter on which you want information from the AUTHORIZE HELP command.

Qualifiers

None.

Description

If you do not specify a keyword, HELP displays information about the topics and commands for which help is available. It then prompts you with "Topic?". You can supply a topic or a command name, or press Return. When you specify a command name and qualifiers, you get detailed information about that command. If you respond by pressing Return, you exit from help. You can also exit from help by pressing Ctrl/Z.

If the command you request accepts qualifiers, the display of the help information about the command is followed by the prompt "Subtopic?". Respond to this prompt with a qualifier name, or press Return. If you respond by pressing Return, HELP prompts with "Topic?". If you want to exit from help directly from this level, press Ctrl/Z.

Examples

UAF> HELP ADD
      

The HELP command in this example displays information about the ADD command:

ADD Adds a user record to the SYSUAF and corresponding identifiers to the rights database. Format ADD newusername Additional information available: Parameter Qualifiers /ACCESS /ACCOUNT /ADD_IDENTIFIER /ALGORITHM /ASTLM /BATCH /BIOLM /BYTLM /CLI /CLITABLES /CPUTIME /DEFPRIVILEGES /DEVICE /DIALUP /DIOLM /DIRECTORY /ENQLM /EXPIRATION /FILLM /FLAGS /GENERATE_PASSWORD /INTERACTIVE /JTQUOTA /LGICMD /LOCAL /MAXACCTJOBS /MAXDETACH /MAXJOBS /NETWORK /OWNER /PASSWORD /PBYTLM /PGFLQUOTA /PRCLM /PRIMEDAYS /PRIORITY /PRIVILEGES /PWDEXPIRED /PWDLIFETIME /PWDMINIMUM /REMOTE /SHRFILLM /TQELM /UIC /WSDEFAULT /WSEXTENT /WSQUOTA Examples /IDENTIFIER /PROXY ADD Subtopic?

UAF> HELP ADD/ACCOUNT
      

The command in this example displays information about the /ACCOUNT qualifier:

ADD /ACCOUNT=account-name Specifies the default name for the account (for example, a billing name or number). The name can be a string of 1 to 8 alphanumeric characters. By default, AUTHORIZE does not assign an account name.

LIST

Writes reports for selected UAF records to a listing file, SYSUAF.LIS, which is placed in the current default directory.

Note LIST/IDENTIFIER, LIST/PROXY, and LIST/RIGHTS are documented as separate commands.

Format

LIST [user-spec]

Parameter

user-spec

Specifies the user name or UIC of the requested UAF record. Without the user-spec parameter, AUTHORIZE lists the user records of all users. The asterisk (*) and percent sign (%) wildcards are permitted in the user name.

Qualifiers

/BRIEF

Specifies that a brief report be written to SYSUAF.LIS. The /BRIEF qualifier is the default qualifier. SYSUAF.LIS is placed in the default directory.

/FULL

Specifies that a full report be written to SYSUAF.LIS, including identifiers held by the user. SYSUAF.LIS is placed in the SYS$SYSTEM directory.

Description

The LIST command creates a listing file of reports for selected UAF records. Print the listing file, SYSUAF.LIS, with the DCL command PRINT.

Specification of a user name results in a single-user report. Specification of the asterisk wildcard character following the LIST command results in reports for all users in ascending sequence by user name. Specification of a UIC results in reports for all users with that UIC. (HP recommends that you assign each user a unique UIC, but if users share a UIC, the report will show all users with that UIC.) You can use the asterisk wildcard character to specify the UIC.

The following table shows how to specify a UIC with the LIST command and use the asterisk wildcard character with the UIC specification to produce various types of reports:

Command	Description
LIST [14,6]	Lists a full report for the user (or users) with member number 6 in group 14.
LIST [14,*] /BRIEF	Lists a brief report for all users in group 14, in ascending sequence by member number.
LIST [*,6] /BRIEF	Lists a brief report for all users with a member number of 6.
LIST [*,*] /BRIEF	Lists a brief report for all users, in ascending sequence by UIC.

Although you must provide separate UICs for each user, the LIST command reports users with the same UIC in the order in which they were added to the SYSUAF. Full reports list the details of the limits, privileges, login flags, and command interpreter. Brief reports do not include the limits, login flags, or command interpreter, nor do they summarize the privileges. AUTHORIZE never displays the password for an account.

See the SHOW command for examples of brief and full reports.

Examples

UAF> LIST ROBIN/FULL
%UAF-I-LSTMSG1, writing listing file
%UAF-I-LSTMSG2, listing file SYSUAF.LIS complete
      

This command lists a full report for the user record ROBIN.

UAF> LIST *
%UAF-I-LSTMSG1, writing listing file
%UAF-I-LSTMSG2, listing file SYSUAF.LIS complete
      

This command results in brief reports for all users in ascending sequence by user name. Note, however, that this is the same result you would produce had you omitted the asterisk wildcard.

UAF> LIST [300,*]
%UAF-I-LSTMSG1, writing listing file
%UAF-I-LSTMSG2, listing file SYSUAF.LIS complete
      

This command lists a brief report for all user records with a group UIC of 300.

LIST/IDENTIFIER

Creates a listing file (RIGHTSLIST.LIS) in which identifier names, attributes, values, and holders are written.

Format

LIST/IDENTIFIER [id-name]

Parameter

id-name

Specifies an identifier name. You can specify the asterisk wildcard character (*) to list all identifiers. If you omit the identifier name, you must specify /USER or /VALUE.

Qualifiers

/BRIEF

Specifies a brief listing in which only the identifier name, value, and attributes appear.

/FULL

Specifies a full listing, in which the names of the identifier's holders are displayed along with the identifier's name, value, and attributes. The /FULL qualifier specifies the default listing format.

/USER=user-spec

Specifies one or more users whose identifiers are to be listed. The user-spec can be a user name or UIC. You can use the asterisk wildcard character (*) to specify multiple user names or UICs. UICs must be in the form [*,*], [n,*], [*,n], or [n,n]. A wildcard user name specification (*) lists identifiers alphabetically by user name; a wildcard UIC specification ([*,*]) lists them numerically by UIC.

/VALUE=value-specifier

Specifies the value of the identifier to be listed. The following formats are valid for the value-specifier:

IDENTIFIER:n	An integer value in the range 65,536 to 268,435,455. You can also specify the value in hexadecimal (precede the value with %X) or octal (precede the value with %O). To differentiate general identifiers from UIC identifiers, %X80000000 is added to the value you specify.
GID:n	GID is the POSIX group identifier. It is an integer value in the range 0 to 16,777,215 (%XFFFFFF). The system will add %XA400.0000 to the value you specify and then enter this new value into the system RIGHTSLIST as an identifier.
UIC:uic	A UIC value in the standard UIC format.

Description

The LIST/IDENTIFIER command creates a listing file in which identifier names, attributes, values, and holders are displayed in various formats depending on the qualifiers specified. Two of these formats are illustrated in the description of the SHOW/IDENTIFIER command.

Print the listing file named RIGHTSLIST.LIS with the DCL command PRINT.

Examples

UAF> LIST/IDENTIFIER INVENTORY
%UAF-I-LSTMSG1, writing listing file
%UAF-I-RLSTMSG, listing file RIGHTSLIST.LIS complete
      

The command in this example generates a full listing for the identifier INVENTORY, including its value (in hexadecimal), holders, and attributes.

UAF> LIST/IDENTIFIER/USER=ANDERSON
%UAF-I-LSTMSG1, writing listing file
%UAF-I-RLSTMSG, listing file RIGHTSLIST.LIS complete
      

This command lists an identifier associated with the user ANDERSON, along with its value and attributes. Note, however, that this is the same result you would produce had you specified ANDERSON's UIC with the following forms of the command:

UAF> LIST/IDENTIFIER/USER=[300,015]

UAF> LIST/IDENTIFIER/VALUE=UIC:[300,015]