After AUTOGEN finishes, the system automatically
shuts down and displays messages similar to the following:
The system will automatically reboot after the shutdown and the
installation will be complete.
SHUTDOWN -- Perform an Orderly System Shutdown
on node I64CSI
%SHUTDOWN-I-BOOTCHECK, performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, basic reboot consistency check completed
.
.
. |
After installation, the OpenVMS
Alpha system is automatically restarted. If the Alpha system does
not reboot automatically, you must manually do so. For example, if
the system disk is DKA400, enter the following command and press Enter:
After shutdown of an OpenVMS Integrity servers
system, it reboots automatically only if you have set the system
disk boot option accordingly; otherwise, you must boot the system
manually, as described in Section 3.5.2.
When the system reboots, it displays informational
messages and accounting information indicating that your OpenVMS
operating system has finished booting and is now ready for use. For
example:
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 25-SEP-2009 14:51:23.47
Accounting information:
Buffered I/O count: 2177 Peak working set size: 6848
Direct I/O count: 1358 Peak page file size: 179552
Page faults: 1805 Mounted volumes: 0
Charged CPU time: 0 00:00:13.37 Elapsed time: 0 00:01:06.20 |
