; ; FILE: @0130.ADF ; MCA Adapter Description File for Proteon p1892plus ProNET-4/16 Token Ring Adapter ; Copyright Proteon, Inc. Westborough, MA 1991, 1992, 1993 ; Version 1.2 (931005) ; AdapterID 00130h AdapterName "Proteon p1892plus 4/16 Mbps Token Ring Adapter" NumBytes 4 NamedItem Prompt "ADF Version Number" Choice "1.2 (931005)" POS[0]=XXXXXXXXb Choice "1.2 (931005)" POS[0]=XXXXXXXXb Help "ADF Version Number: This is the version number of the ADF file in use. This value is provided for convenience and can not be changed." NamedItem Prompt "Bus Arbitration Fairness" Choice "On" POS[0] = XXXXXX1Xb Choice "Off" POS[0] = XXXXXX0Xb Help "Adapter arbitration fairness control as defined by the Micro Channel Architecture. Normally set to ." NamedItem Prompt "Bus Arbitration Level" Choice "Level 0" POS[0]=0000XXXXb arb 0d Choice "Level 1" POS[0]=0001XXXXb arb 1d Choice "Level 2" POS[0]=0010XXXXb arb 2d Choice "Level 3" POS[0]=0011XXXXb arb 3d Choice "Level 5" POS[0]=0101XXXXb arb 5d Choice "Level 6" POS[0]=0110XXXXb arb 6d Choice "Level 7" POS[0]=0111XXXXb arb 7d Choice "Level 8" POS[0]=1000XXXXb arb 8d Choice "Level 9" POS[0]=1001XXXXb arb 9d Choice "Level 10" POS[0]=1010XXXXb arb 10d Choice "Level 11" POS[0]=1011XXXXb arb 11d Choice "Level 12" POS[0]=1100XXXXb arb 12d Choice "Level 13" POS[0]=1101XXXXb arb 13d Choice "Level 14" POS[0]=1110XXXXb arb 14d Help "Select an adapter bus arbitration level. Lower levels have higher priority. Conflicts are marked by an asterisk (*) and must be resolved." NamedItem Prompt "Pseudo DMA Feature" Choice "Disabled" POS[1] = XXX0XXXXb Choice "Enabled" POS[1] = XXX1XXXXb Help "Pseudo DMA Feature: The pseudo DMA feature should ordinarily be disabled to allow maximum performance using adapter bus master DMA. Enabling this feature prevents the adapter from arbitrating for the micro channel bus. The assignment can be changed by selecting 'Change Configuration' and then using the F5=Previous and F6=Next keys." NamedItem Prompt "I/O Base Address" Choice "0x71C0" POS[3]=XXXXX000b io 071C0h-071CFh Choice "0x71D0" POS[3]=XXXXX001b io 071D0h-071DFh Choice "0x75C0" POS[3]=XXXXX010b io 075C0h-075CFh Choice "0x75D0" POS[3]=XXXXX011b io 075D0h-075DFh Choice "0x79C0" POS[3]=XXXXX100b io 079C0h-079CFh Choice "0x79D0" POS[3]=XXXXX101b io 079D0h-079DFh Choice "0x7DC0" POS[3]=XXXXX110b io 07DC0h-07DCFh Choice "0x7DD0" POS[3]=XXXXX111b io 07DD0h-07DDFh Help "Select an adapter I/O base address. Conflicts are marked by an asterisk (*) and must be resolved." NamedItem Prompt "Interrupt Request Level" Choice "Level 5" POS[3]=XX000XXXb int 5d Choice "Level 3" POS[3]=XX010XXXb int 3d Choice "Level 4" POS[3]=XX001XXXb int 4d Choice "Level 15" POS[3]=XX011XXXb int 15d Choice "Level 14" POS[3]=XX100XXXb int 14d Choice "Level 12" POS[3]=XX101XXXb int 12d Choice "Level 11" POS[3]=XX110XXXb int 11d Choice "Level 10" POS[3]=XX111XXXb int 10d Help "Select an adapter interrupt request (IRQ) level." NamedItem Prompt "Transmit Speed" Choice "16 Mbps" POS[0] = XXXX1XXXb Choice "4 Mbps" POS[0] = XXXX0XXXb Help "Select the transmit speed, or ring speed, appropriate for your environment." NamedItem Prompt "Adapter Cable Type" Choice "STP" POS[0]=XXXXX1XXb Choice "UTP" POS[0]=XXXXX0XXb Help "Select the cable type, or media type, appropriate for your environment." NamedItem Prompt "Flash Boot Memory" Choice "No Flash Boot Memory installed" POS[1]=000XXX00b Choice "64K Flash Boot Memory at C0000" POS[1]=001XXX00b mem 0C0000h-0CFFFFh Choice "64K Flash Boot Memory at C8000" POS[1]=001XXX01b mem 0C8000h-0D7FFFh Choice "64K Flash Boot Memory at D0000" POS[1]=001XXX10b mem 0D0000h-0DFFFFh Help "If you have installed a boot ROM on the adapter, select a memory address for the ROM. Conflicts are marked by an asterisk (*) and must be resolved."