AdapterID       0583Dh
AdapterName     "SCSI Adapter (#103C)"

NumBytes        2

NamedItem
        Prompt  "Adapter Memory Location"

        Choice  "ROM Disabled"
                pos[0] = XXXXX00Xb
        Choice  "Segment C800"
                pos[0] = XXXXX01Xb
                mem 0c8000h-0c9fffh
        Choice  "Segment D000"
                pos[0] = XXXXX10Xb
                mem 0d0000h-0d1fffh
        Choice  "Segment D800"
                pos[0] = XXXXX11Xb
                mem 0d8000h-0d9fffh

        Help
        "If you wish to boot your computer from a cartridge you
        must choose the memory location the adapter will use for its BIOS
        ROM.  There are three memory locations that can be selected. Under
        normal circumstances, select <Segment C800>.  If your computer has
        a hard disk or you do not wish to boot from a cartridge select
        <ROM Disabled>."

NamedItem
        Prompt  "Interrupt Level"

        Choice  "Interrupt Disabled"
                pos[1] = XX000XXXb
        Choice  "level 3"
                pos[1] = XX110XXXb
                int 3
        Choice  "level 6"
                pos[1] = XX111XXXb
                int 6
        Choice  "level 10"
                pos[1] = XX010XXXb
                int 10
        Choice  "level 12"
                pos[1] = XX100XXXb
                int 12
        Choice  "level 9"
                pos[1] = XX001XXXb
                int 9
        Choice  "level 14"
                pos[1] = XX101XXXb
                int 14
        Choice  "level 11"
                pos[1] = XX011XXXb
                int 11

        Help
        "This is the interrupt level to be used by the adapter.
        Under normal circumstances, select <Interrupt Disabled>."

NamedItem
        Prompt  "I/O Base Address"

        Choice  "i/o base 0200h"
                pos[1] = XXXXX001b
                io  0200h - 0207h
        Choice  "i/o base 0240h"
                pos[1] = XXXXX010b
                io  0240h - 0247h
        Choice  "i/o base 0280h"
                pos[1] = XXXXX011b
                io  0280h - 0287h
        Choice  "i/o base 02C0h"
                pos[1] = XXXXX100b
                io  02c0h - 02c7h
        Choice  "i/o base 0300h"
                pos[1] = XXXXX101b
                io  0300h - 0307h
        Choice  "i/o base 0340h"
                pos[1] = XXXXX110b
                io  0340h - 0347h
        Choice  "i/o base 0380h"
                pos[1] = XXXXX111b
                io  0380h - 0387h
        Choice  "i/o disabled"
                pos[1] = XXXXX000b

        Help
        "This is the base of the I/O address space used by the adapter.
        The adapter uses eight bytes of address space.
        Under normal circumstances, select <i/o base 200>. This assignment
        need only be changed if it is in conflict with another adapter."


NamedItem
        Prompt  "Option Switch"

        Choice  "On"
                pos[0] = XXXX1XXXb
        Choice  "Off"
                pos[0] = XXXX0XXXb
        Help
        "Software defined option switch."