AdapterID  5FE9H

AdapterName  "SP-1050 Serial/Parallel port adapter"

NumBytes 1

NamedItem

        Prompt  "Parallel port address"

          Choice "Printer 1"
            pos[0]=XXXXX01XB
            io 03BCH-03BFH

          Choice "Printer 2"
            pos[0]=XXXXX10XB
            io 0378H-037BH

          Choice "Printer 3"
            pos[0]=XXXXX11XB
            io 0278H-027BH

          Choice "Disabled"
            pos[0]=XXXXX00XB

Help
        "Select one of the 3 available addresses for the parallel
         printer port.  Address conflicts will be marked with an
         asterick and must be resolved before using the adapter."

NamedItem

        Prompt  "Parallel port interrupt"

          Choice "IRQ 7"
            pos[0]=XXX1XXXXB
            int 7

          Choice "IRQ 5"
            pos[0]=XXX0XXXXB
            int 5

Help
        "The parallel printer port may select interrupt level 5 or 7.
         Under normal circumstances, select IRQ 7."

NamedItem

        Prompt  "Parallel port extended mode"

          Choice "Disabled"
            pos[0]=XXXX0XXXB

          Choice "Enabled"
            pos[0]=XXXX1XXXB

Help
        "This selection will enable the printer port extended mode.
         When disabled, the port will behave as a parallel printer
         port.  When enabled, the port may be used for parallel
         bi-directional data transfer."

NamedItem

        Prompt  "Serial port address"

          Choice "Serial 2"
            pos[0]=001XXXXXB
            io 02F8H-02FFH

          Choice "Serial 3"
            pos[0]=010XXXXXB
            io 3220H-3227H

          Choice "Serial 4"
            pos[0]=011XXXXXB
            io 3228H-322FH 

          Choice "Serial 5"
            pos[0]=100XXXXXB
            io 4220H-4227H 

          Choice "Serial 6"
            pos[0]=101XXXXXB
            io 4228H-422FH 

          Choice "Serial 7"
            pos[0]=110XXXXXB
            io 5220H-5227H 

          Choice "Serial 8"
            pos[0]=111XXXXXB
            io 5228H-522FH 

          Choice "Disabled"
            pos[0]=000XXXXXB

Help
        "Select one of the 7 available addresses for the serial
         communications port.  Address conflicts will be marked with
         an asterick and must be resolved before using the adapter."