AdapterID 0610fh

AdapterName "AMS IOSIX-6 Adapter"

NumBytes  1


NamedItem

       Prompt "AMS IOSIX-6. 1-Serial 2-Parallel"

       choice "COM-2  LPT-2,3  IRQ-3,5,7"
               pos[0] = 10010001b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 5 7

       choice "COM-2  LPT-2,3  IRQ-3,7,7"
               pos[0] = 10010111b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 7

       choice "COM-2  LPT-2,3  IRQ-3,5,5"
               pos[0] = 10010011b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 5

       choice "COM-3  LPT-2,3  IRQ-3,5,7"
               pos[0] = 10110001b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 5 7

       choice "COM-3  LPT-2,3  IRQ-3,7,7"
               pos[0] = 10110111b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 7

       choice "COM-3  LPT-2,3  IRQ-3,5,5"
               pos[0] = 10110011b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 5

       choice "COM-1  LPT-1,2  IRQ-4,7,5"
               pos[0] = 11111001b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 7 5

       choice "COM-1  LPT-1,2  IRQ-4,7,7"
               pos[0] = 11111111b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 7

       choice "COM-1  LPT-1,2  IRQ-4,5,5"
               pos[0] = 11111011b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 5

       choice "COM-1  IRQ-4"
               pos[0] = 11101111b
               io 3F8h-3FFh int 4

       choice "COM-2  IRQ-3"
               pos[0] = 10000001b
               io 2F8h-2FFh int 3

       choice "COM-3  IRQ-3"
               pos[0] = 10100001b
               io 3220h-3227h int 3

       choice "COM-2  LPT-2,3  IRQ-3,5,7  B"
               pos[0] = 00010001b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 5 7

       choice "COM-2  LPT-2,3  IRQ-3,7,7  B"
               pos[0] = 00010111b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 7

       choice "COM-2  LPT-2,3  IRQ-3,5,5  B"
               pos[0] = 00010011b
               io 2F8h-2FFh 378h-37Ah 278h-27Ah int 3 5

       choice "COM-3  LPT-2,3  IRQ-3,5,7  B"
               pos[0] = 00110001b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 5 7

       choice "COM-3  LPT-2,3  IRQ-3,7,7  B"
               pos[0] = 00110111b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 7

       choice "COM-3  LPT-2,3  IRQ-3,5,5  B"
               pos[0] = 00110011b
               io 3220h-3227h 378h-37Ah 278h-27Ah int 3 5

       choice "COM-1  LPT-1,2  IRQ-4,7,5  B"
               pos[0] = 01111001b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 7 5

       choice "COM-1  LPT-1,2  IRQ-4,7,7  B"
               pos[0] = 01111111b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 7

       choice "COM-1  LPT-1,2  IRQ-4,5,5  B"
               pos[0] = 01111011b
               io 3F8h-3FFh 3BCh-3BEh 378h-37Ah int 4 5

       choice "SetUp for DIAGS.."
               pos[0] = 00000000b

       choice "Disable IOSIX-6 Card"
               pos[0] = 11101110b


Help
      " LPT implies Parallel Port, COM implies Serial Port, and IRQ implies
        interrupt used. Example: COM-1,2  LPT-2,3  IRQ-4,3,5,7  B.. If this
        choice is selected the IOSIX adapter card will be configured for
        COM Ports 1 & 2 and LPT Ports 2 & 3. Also, COM-1 will use interrupt
        4, COM-2 will use interrupt 3, LPT-2 will use interrupt 5, and LPT-3
        will use interrupt 7. If a 'B' is present at the end of the selection,
        like in the example, then the parallel ports are configured for
        Bidirectional Mode (Extended Mode). Absence of the 'B' indicates
        that the parallel ports are configured for output only. NOTE: If the
        Operating System you are using is OS/2 then it is required that all
        the parallel ports be configured to use IRQ-7. If the IBM Diagnostics
        are going to be run then the IOSIX card must be configured to the
        'SetUp for IBM DIAGS' selection.
        Use  F5 = previous choice  F6 = next. "