AdapterId 06220h

AdapterName  "ACCTON Micro Channel EtherPair/EtherCoax adapter"

NumBytes 1

NamedItem
	Prompt "Adapter I/O Base Address"
      choice "Base 300"  pos[0]=XXXXX00Xb  io 0300h-031Fh
      choice "Base 340"  pos[0]=XXXXX10Xb  io 0340h-035Fh
      choice "Base 360"  pos[0]=XXXXX11Xb  io 0360h-037Fh
      Help
"Use F5 and F6 to select an I/O port address. An asterisk indicates that
 address is already in use; pick another please."

NamedItem
	Prompt "Interrupt Level Select"
      choice "INT 3"  pos[0]=XXXX1XXXb  int 3
      choice "INT 2"  pos[0]=XXXX0XXXb  int 2
      Help
"Use F5 and F6 to select interrupt level"

Nameditem
	Prompt	"RPL Memory Address"
      choice "Disabled RPL"       pos[0]=XXX0XXXXb
      choice "Primary 0CC000h"    pos[0]=XX01XXXXb  mem 0CC000h-0CDFFFh
      choice "Secondary 0DC000h"  pos[0]=XX11XXXXb  mem 0DC000h-0DDFFFh
      Help
"Default disabled Remote Program Load. If a remote boot PROM pluged on
network adapter; please use F5 and F6 to toggle the RPL address setting."