AdapterID 0651Bh

AdapterName  "Racore Token-Ring Adapter"

NumBytes 1

nameditem
        Prompt  "I/O Address"
          Choice  "I/O address A00h - A0Fh"
            pos[0]=00XXXXXXb
            io 0A00h-0A0Fh
          Choice  "I/O address A20h - A2Fh"
            pos[0]=01XXXXXXb
            io 0A20h-0A2Fh
          Choice  "I/O address A40h - A4Fh"
            pos[0]=10XXXXXXb
            io 0A40h-0A4Fh
          Choice  "I/O address A60h - A6Fh"
            pos[0]=11XXXXXXb
            io 0A60h-0A6Fh
        Help
        "This selects the I/O addresses the adapter will use."

nameditem
        Prompt  "Interrupt (IRQ)"
          Choice  "IRQ3"
            pos[0]=XX00XXXXb
            int 3
          Choice  "IRQ9"
            pos[0]=XX01XXXXb
            int 9
          Choice  "IRQ10"
            pos[0]=XX10XXXXb
            int 10
          Choice  "IRQ11"
            pos[0]=XX11XXXXb
            int 11
        Help
        "Interrupt (IRQ) select.  This selects which interrupt (IRQ) line to use."

nameditem
        Prompt  "Adapter Memory/ROM Location"
          Choice "Segment CC000 - CFFFF"
            pos[0]=XXXX00XXb
            mem 0CC000h-0CFFFFh
          Choice "Segment D0000 - D3FFF"
            pos[0]=XXXX01XXb
            mem 0D0000h-0D3FFFh
          Choice "Segment D8000 - DBFFF"
            pos[0]=XXXX10XXb
            mem 0D8000h-0DBFFFh
          Choice "Segment DC000 - DFFFF"
            pos[0]=XXXX11XXb
            mem 0DC000h-0DFFFFh
        Help
        "To configure this adapter you must choose the memory location the
         adapter will use for it's RAM/ROM.  There are four memory locations
         that can be selected."

nameditem
        Prompt  "LLC 802.2 ROM Enable/Disable"
          Choice "Disabled"
            pos[0]=XXXXXX0Xb
          Choice "Enabled"
	    pos[0]=XXXXXX1Xb
	Help
	"To run applications that use the 802.2 interface, this option must
	be enabled."