AdapterId 67E7h

AdapterName "KRAFT G/S+ Adapter Card"

NumBytes 1

NamedItem
        Prompt "Communications Port"
        choice "COM1:"  pos[0]=XXXXX11Xb  io 03f8h-03ffh  int 4
        choice "COM2:"  pos[0]=XXXXX01Xb  io 02f8h-02ffh  int 3
        choice "COM3:"  pos[0]=XXXXX00Xb  io 3220h-3227h  int 3
        choice "COM4:"  pos[0]=XXXXX10Xb  io 3228h-322fh  int 3
   Help
"This port can be assigned as serial port (Serial 1 through 4).
 More than one G/S+ Adapter can be installed but each must have
 a different assignment.  Conflicting assignments are marked
 with an asterisk and must be changed.

 F5=Previous and F6=Next keys change this assignment while
 in the 'Change configuration' window."


NamedItem
	Prompt "Joystick/Game section "
        choice "ON "  pos[0]=XXXX1XXXb io 0200h-0201h
        choice "OFF " pos[0]=XXXX0XXXb
   Help
      "You may turn this portion of the card ON or OFF without
      affecting the serial port.  You are allowed to have
      more than one G/S+ Adapter but only one card can have its
      Joystick section ON.  Conflicting assignments are marked
      with an asterisk and must be changed.

      F5=Previous and F6=Next keys turn this section ON/OFF
      while in the 'Change configuration' window."


NamedItem
	Prompt "Joystick/Game Initial Speed Assignment"
      choice " 4 MHz"   pos[0]=1111XXXXb
      choice " 5 MHz"   pos[0]=1110XXXXb
      choice " 6 MHz"   pos[0]=1101XXXXb
      choice " 7 MHz"   pos[0]=1100XXXXb
      choice " 8 MHz"   pos[0]=1011XXXXb
      choice " 9 MHz"   pos[0]=1010XXXXb
      choice "10 MHz"   pos[0]=1001XXXXb
      choice "12 MHz"   pos[0]=1000XXXXb
      choice "14 MHz"   pos[0]=0111XXXXb
      choice "16 MHz"   pos[0]=0110XXXXb
      choice "18 MHz"   pos[0]=0101XXXXb
      choice "20 MHz"   pos[0]=0100XXXXb
      choice "22 MHz"   pos[0]=0011XXXXb
      choice "25 MHz"   pos[0]=0010XXXXb
      choice "30 MHz"   pos[0]=0001XXXXb
      choice "35 MHz"   pos[0]=0000XXXXb
   Help
      "This assignment will set the initial speed of your
      Joystick/Game Port.  The optimal speed can be determined
      by using the CSOFT or KCARD utility.  Some programs
      requires 4 MHz.  Use the setting you find works the best.
      Initial Setting can always be changed with CSOFT, KCARD or
      KEYCON utilities.

      Use the F5=Previous and the F6=Next keys to change speed."