;
;	Daniel Specker
;	Inter-Ibex AG
;	Tue Oct 23 12:03:16 1990
;	ISC-2 V60S
;	1.0
;
;	Intelligent Serial-communication Controller
;
;
;
;
AdapterId 069F9h
;
AdapterName "IBEX Intelligent Serial-communication Controller"
;
NumBytes 4
;
;
FixedResources
	pos[1]=11111XXXb
	pos[2]=11111XXXb
	pos[3]=11111111b


NamedItem	Prompt	"I/O port address"
	choice "Base address: 00038F"
		pos[0]=X000XXXXb	pos[3]=1XXXXXXXb	io	00038Fh - 00038Fh
	choice "Base address: 00039F"
		pos[0]=X001XXXXb	pos[3]=1XXXXXXXb	io	00039Fh - 00039Fh
	choice "Base address: 001A80"
		pos[0]=X010XXXXb	pos[3]=1XXXXXXXb	io	001A80h - 001A80h
	choice "Base address: 004444"
		pos[0]=X011XXXXb	pos[3]=1XXXXXXXb	io	004444h - 004444h
	choice "Base address: 009D70"
		pos[0]=X100XXXXb	pos[3]=1XXXXXXXb	io	009D70h - 009D70h
	choice "Base address: 00A658"
		pos[0]=X101XXXXb	pos[3]=1XXXXXXXb	io	00A658h - 00A658h
	choice "Base address: 00C6FC"
		pos[0]=X110XXXXb	pos[3]=1XXXXXXXb	io	00C6FCh - 00C6FCh
	choice "Base address: 00EAF0"
		pos[0]=X111XXXXb	pos[3]=1XXXXXXXb	io	00EAF0h - 00EAF0h
Help
"The IBEX Intelligent Serial-communication Controller
may be configured for a I/O port address.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem	Prompt	"interrupt communication register addr"
	choice "Base address: 00038E"
		pos[1]=XXXXX000b	pos[3]=1XXXXXXXb	io	00038Eh - 00038Eh
	choice "Base address: 00039E"
		pos[1]=XXXXX001b	pos[3]=1XXXXXXXb	io	00039Eh - 00039Eh
	choice "Base address: 002C80"
		pos[1]=XXXXX010b	pos[3]=1XXXXXXXb	io	002C80h - 002C80h
	choice "Base address: 005554"
		pos[1]=XXXXX011b	pos[3]=1XXXXXXXb	io	005554h - 005554h
	choice "Base address: 008BBC"
		pos[1]=XXXXX100b	pos[3]=1XXXXXXXb	io	008BBCh - 008BBCh
	choice "Base address: 009440"
		pos[1]=XXXXX101b	pos[3]=1XXXXXXXb	io	009440h - 009440h
	choice "Base address: 00C0A0"
		pos[1]=XXXXX110b	pos[3]=1XXXXXXXb	io	00C0A0h - 00C0A0h
	choice "Base address: 00EFF8"
		pos[1]=XXXXX111b	pos[3]=1XXXXXXXb	io	00EFF8h - 00EFF8h
Help
"The IBEX Intelligent Serial-communication Controller
may be configured for interrupt communication address.
Bit 0 have to be 0 for IRQ line active.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem	Prompt	"dual port RAM addr (4k page)"
	choice "Base address: 0C0000"
		pos[0]=XXXX000Xb	mem	0C0000h - 0C0FFFh
	choice "Base address: 0C1000"
		pos[0]=XXXX001Xb	mem	0C1000h - 0C1FFFh
	choice "Base address: 0C8000"
		pos[0]=XXXX010Xb	mem	0C8000h - 0C8FFFh
	choice "Base address: 0C9000"
		pos[0]=XXXX011Xb	mem	0C9000h - 0C9FFFh
	choice "Base address: 0D0000"
		pos[0]=XXXX100Xb	mem	0D0000h - 0D0FFFh
	choice "Base address: 0D8000"
		pos[0]=XXXX101Xb	mem	0D8000h - 0D8FFFh
	choice "Base address: 0DA000"
		pos[0]=XXXX110Xb	mem	0DA000h - 0DAFFFh
	choice "Base address: 0DF000"
		pos[0]=XXXX111Xb	mem	0DF000h - 0DFFFFh
Help
"The IBEX Intelligent Serial-communication Controller
has a 4k dual port RAM. Choose desired memory range!
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;
;

NamedItem	Prompt	"selected IRQ line"
	choice "IRQ  3"    pos[2]=XXXXX000b
	choice "IRQ  4"    pos[2]=XXXXX001b
	choice "IRQ  5"    pos[2]=XXXXX010b
	choice "IRQ  7"    pos[2]=XXXXX011b
	choice "IRQ 10"    pos[2]=XXXXX100b
	choice "IRQ 11"    pos[2]=XXXXX101b
	choice "IRQ 12"    pos[2]=XXXXX110b
	choice "IRQ 15"    pos[2]=XXXXX111b
Help
"The IBEX Intelligent Serial-communication Controller
may be configured for several interrupts.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;
;
;
;

NamedItem	Prompt	"Interrupt enable"
	choice "on "    pos[0]=1XXXXXXXb
	choice "off"    pos[0]=0XXXXXXXb
Help
"The IBEX Intelligent Serial-communication Controller
may be configured for interrupt control.
Use the F5 or F6 key to toggle interrupt enable."
;
;
;
;
NamedItem	Prompt	"automatic system destruct"
	choice "off      "    pos[3]=XXXXXXXXb
Help
"Choice 'OFF' is needed in this configuration part."
;
;
;