;
;       INTER-IBEX Corp. Switzerland
;       Richard Lebeda
;
;       06.02.1991
;       0
;       1.01______
;       EPB2001
;       V 1.0 - ALIAS-6x/ALIAS-7x
;
AdapterId 06A51h

AdapterName "IBEX SERCOM2"

NumBytes 4

FixedResources
        pos[2]=X1XXXXXXb
        pos[3]=XX11111Xb


NamedItem       Prompt  "memory bank 0"
        choice "memory bank 0 off"
                pos[0]=XXXX000Xb
        choice "Base address: 0A0000; 64k"
                pos[0]=XXXX001Xb        mem     0A0000h - 0AFFFFh
        choice "Base address: 0B0000; 32k"
                pos[0]=XXXX010Xb        mem     0B0000h - 0B7FFFh
        choice "Base address: 0C0000; 32k"
                pos[0]=XXXX011Xb        mem     0C0000h - 0C7FFFh
        choice "Base address: 0C0000; 64k"
                pos[0]=XXXX100Xb        mem     0C0000h - 0CFFFFh
        choice "Base address: 0C8000; 32k"
                pos[0]=XXXX101Xb        mem     0C8000h - 0CFFFFh
        choice "Base address: 0D0000; 64k"
                pos[0]=XXXX110Xb        mem     0D0000h - 0DFFFFh
        choice "Base address: 0D8000; 32k"
                pos[0]=XXXX111Xb        mem     0D8000h - 0DFFFFh
Help
"The IBEX SERCOM2 micro channel interface
may be configured for mem addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "memory bank 1"
        choice "memory bank 0 off"
                pos[0]=X000XXXXb
        choice "Base address: 0A0000; 64k"
                pos[0]=X001XXXXb        mem     0A0000h - 0AFFFFh
        choice "Base address: 0C4000; 16k"
                pos[0]=X010XXXXb        mem     0C4000h - 0C7FFFh
        choice "Base address: 0CC000; 16k"
                pos[0]=X011XXXXb        mem     0CC000h - 0CFFFFh
        choice "Base address: 0B0000; 32k"
                pos[0]=X100XXXXb        mem     0B0000h - 0B7FFFh
        choice "Base address: 0C0000; 32k"
                pos[0]=X101XXXXb        mem     0C0000h - 0C7FFFh
        choice "Base address: 0D0000; 32k"
                pos[0]=X110XXXXb        mem     0D0000h - 0D7FFFh
        choice "Base address: 0D8000; 32k"
                pos[0]=X111XXXXb        mem     0D8000h - 0DFFFFh
Help
"The IBEX SERCOM2 micro channel interface
may be configured for mem addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "SCC basis address (uses 4 bytes)"
        choice "Base address: 000380"
                pos[1]=XXXXX000b        pos[3]=1XXXXXXXb        io      000380h - 000383h
        choice "Base address: 000390"
                pos[1]=XXXXX001b        pos[3]=1XXXXXXXb        io      000390h - 000393h
        choice "Base address: 001380"
                pos[1]=XXXXX010b        pos[3]=1XXXXXXXb        io      001380h - 001383h
        choice "Base address: 004440"
                pos[1]=XXXXX011b        pos[3]=1XXXXXXXb        io      004440h - 004443h
        choice "Base address: 009D68"
                pos[1]=XXXXX100b        pos[3]=1XXXXXXXb        io      009D68h - 009D6Bh
        choice "Base address: 00A650"
                pos[1]=XXXXX101b        pos[3]=1XXXXXXXb        io      00A650h - 00A653h
        choice "Base address: 00C6CC"
                pos[1]=XXXXX110b        pos[3]=1XXXXXXXb        io      00C6CCh - 00C6CFh
        choice "Base address: 00EFF0"
                pos[1]=XXXXX111b        pos[3]=1XXXXXXXb        io      00EFF0h - 00EFF3h
Help
"The IBEX SERCOM2 micro channel interface
may be configured for io addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;

NamedItem       Prompt  "selected IRQ line"
        choice "IRQ  3"    pos[2]=XXXXX000b
        choice "IRQ  4"    pos[2]=XXXXX001b
        choice "IRQ  5"    pos[2]=XXXXX010b
        choice "IRQ  7"    pos[2]=XXXXX011b
        choice "IRQ 10"    pos[2]=XXXXX100b
        choice "IRQ 11"    pos[2]=XXXXX101b
        choice "IRQ 12"    pos[2]=XXXXX110b
        choice "IRQ 15"    pos[2]=XXXXX111b
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "Interrupt enable"
        choice "on "    pos[0]=1XXXXXXXb
        choice "off"    pos[0]=0XXXXXXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "watchdog or timer frequency"
        choice "21.3 ms"    pos[2]=XX10XXXXb
        choice "42.7 ms"    pos[2]=XX11XXXXb
        choice "5.3 ms "    pos[2]=XX00XXXXb
        choice "10.7 ms"    pos[2]=XX01XXXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "number of wait states"
        choice "2 wait states"    pos[1]=XX110XXXb
        choice "1 wait state "    pos[1]=XX111XXXb
        choice "8 wait states"    pos[1]=XX000XXXb
        choice "7 wait states"    pos[1]=XX001XXXb
        choice "6 wait states"    pos[1]=XX010XXXb
        choice "5 wait states"    pos[1]=XX011XXXb
        choice "4 wait states"    pos[1]=XX100XXXb
        choice "3 wait states"    pos[1]=XX101XXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "wait state generator enable"
        choice "on "    pos[1]=X1XXXXXXb
        choice "off"    pos[1]=X0XXXXXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "watchdog/timer select"
        choice "timer   "    pos[1]=0XXXXXXXb
        choice "watchdog"    pos[1]=1XXXXXXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "controller clock frequency"
        choice "12.288 Mc"    pos[2]=XXXX1XXXb
        choice "6.144 Mc "    pos[2]=XXXX0XXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "serial clock control"
        choice "pin 15 connected as input "    pos[2]=1XXXXXXXb
        choice "pin 24 connected as output"    pos[2]=0XXXXXXXb
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;

NamedItem       Prompt  "memory bank organisation"
        choice "memory bank 0 only        "    pos[3]=XXXXXXX0b
        choice "memory bank 0 and 1 active"    pos[3]=XXXXXXX1b
Help
"The IBEX SERCOM2 micro channel interface
may be configured for switch control addresses.
Use the F5=Previous and the F6=Next keys to change
this assignment in the 'Change Configuration' window.
Conflicting assignments are marked with an asterisk
and must be changed to use the adapter."
;
;
;
;