; 2703-032-A  @6B0AH03.003		    << 89-11-16 07.29 >>
; Adapter Description File for Handy 240 PS-2 modem.
; Germany
;

AdapterId 6B0AH

AdapterName  "Handy 240 PS-2 Internal Modem (Germany)"

NumBytes 3

FixedResources	      pos[1]=XX0XXXXXb

NamedItem
	Prompt "Serial configuration"
      choice "SERIAL_1"  pos[0]=XXX1000Xb  io 03f8h-03ffh  int 4
      choice "SERIAL_2"  pos[0]=XXX1001Xb  io 02f8h-02ffh  int 3
      choice "SERIAL_3"  pos[0]=XXX0010Xb  io 3220h-3227h  int 3
      choice "SERIAL_4"  pos[0]=XXX0011Xb  io 3228h-322fh  int 3
      choice "SERIAL_5"  pos[0]=XXX0100Xb  io 4220h-4227h  int 3
      choice "SERIAL_6"  pos[0]=XXX0101Xb  io 4228h-422fh  int 3
      choice "SERIAL_7"  pos[0]=XXX0110Xb  io 5220h-5227h  int 3
      choice "SERIAL_8"  pos[0]=XXX0111Xb  io 5228h-522fh  int 3
   Help
"The Handy 240 Internal Modem can be assigned to
use Serial 1 through Serial 8.

Use the F5=Previous and the F6=Next keys to change
serial port assignments.  Conflicting assignments are
marked with an asterisk and must be changed."


NamedItem
	Prompt "Communication speed"
      choice "2400, 1200, 300 or 110 bps"  pos[1]=XXXXXXX0b
      choice "1200 bps only"               pos[1]=XXXXXXX1b
   Help
"You have two choices: '2400, 1200, 300 or 110 bps' and
'1200 bps only'.

Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is '2400, 1200, 300 or 110 bps'."


NamedItem
	Prompt "Word length"
      choice "10 bits"  pos[1]=XXXXX00Xb
      choice "11 bits"  pos[1]=XXXXX01Xb
      choice " 8 bits"  pos[1]=XXXXX10Xb
      choice " 9 bits"  pos[1]=XXXXX11Xb
   Help
"The word length is the sum of the start bit, the data bits,
the parity bit (if used) and the stop bit.

Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is '10 bits'."


NamedItem
	Prompt "Guard tone"
      choice "No guard tone"       pos[1]=XXX10XXXb
      choice "1800 Hz guard tone"  pos[1]=XXX00XXXb
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is 'No guard tone'."


NamedItem
	Prompt "Dialling methode"
      choice "Tone dialling"   pos[1]=X0XXXXXXb
      choice "Pulse dialling"  pos[1]=X1XXXXXXb
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is 'Tone dialling'."


NamedItem
	Prompt "Mode after 'DATENTASTE'"
      choice "Originate mode"   pos[1]=0XXXXXXXb
      choice "Answer mode"      pos[1]=1XXXXXXXb
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is 'Originate mode'."


NamedItem
	Prompt "Transmit level"
      choice "-12 dBm"  pos[2]=XXXXXX00b
      choice "-15 dBm"  pos[2]=XXXXXX10b
      choice " -6 dBm"  pos[2]=XXXXXX11b
      choice " -9 dBm"  pos[2]=XXXXXX01b
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is '-12 dBm'."


NamedItem
	Prompt "Circuits 105 (RTS) / 106 (CTS) options"
      choice "105 (RTS) considered as ON"   pos[2]=XXXXX0XXb
      choice "106 (CTS) follows 105 (RTS)"  pos[2]=XXXXX1XXb
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is '105 (RTS) considered as ON'."


NamedItem
	Prompt "Lost carrier to hang up delay"
      choice "10 s"    pos[2]=XXXX0XXXb
      choice "0,25 s"  pos[2]=XXXX1XXXb
   Help
"Use the F5=Previous and the F6=Next keys to change
between the choices.

The default setting is '10 s'."