AdapterID 06b84h

AdapterName  " NCPe Multiboard /2 "

NumBytes 1

nameditem
        Prompt  "RAM Address Range"
          Choice "0CC000 - 0CFFFF"
            pos[0]=011XXXXXb
            mem 0CC000h-0CFFFFh
          Choice "0D4000 - 0D7FFF"
            pos[0]=010XXXXXb
            mem 0D4000h-0D7FFFh
          Choice "0DC000 - 0DFFFF"
            pos[0]=001XXXXXb
            mem 0DC000h-0DFFFFh
          Choice "E00000 - E03FFF"
            pos[0]=100XXXXXb
            mem 0E00000h-0E03FFFh
          Choice "F00000 - F03FFF"
            pos[0]=101XXXXXb
            mem 0F00000h-0F03FFFh
          Choice "FE0000 - FE3FFF"
            pos[0]=110XXXXXb
            mem 0FE0000h-0FE3FFFh
        Help
        "To configure this adapter you must choose the memory location the
         adapter will use for its communication buffers.  There are six memory
         locations that can be selected. We recommend using <Segment D000>."


NamedItem
        Prompt "Interrupt Level"

          Choice "IRQ 3 "
            pos[0]=XXX001XXb
            int 3
          Choice "IRQ 5 "
            pos[0]=XXX010XXb
            int 5
          Choice "IRQ 9 "
            pos[0]=XXX011XXb
            int 9
          Choice "IRQ 10"
            pos[0]=XXX100XXb
            int 10
          Choice "IRQ 11"
            pos[0]=XXX101XXb
            int 11
          Choice "IRQ 12"
            pos[0]=XXX110XXb
            int 12
          Choice "IRQ 15"
            pos[0]=XXX111XXb
            int 15
        Help
        "To configure this adapter you must choose the IRQ Setting the
         adapter will use for its Interrupt. There are seven IRQ Settings
         that can be selected. We recommend using <IRQ9>."