AdapterId       06B8Dh
AdapterName     "MMR VTD/5MC - Multiple Protocol Adapter for BULL Systems"
NumBytes        1

NamedItem
Prompt          "Card Enabled"
Choice          "Yes"       pos[0]=XXXXXXX1b
Choice          "No"        pos[0]=XXXXXXX0b
Help
"Set Card Enabled to 'Yes' to enable the VTD/5MC board.
Use the F5=Previous and F6=Next keys to change from 'Yes' to 'No'
and vice versa."

NamedItem
Prompt          "Card Address"
Choice          "200-203"   pos[0]=X000XXXXb io 200-203
Choice          "220-223"   pos[0]=X001XXXXb io 220-223
Choice          "240-243"   pos[0]=X010XXXXb io 240-243
Choice          "260-263"   pos[0]=X011XXXXb io 260-263
Help
"The address of the VTD/5MC board is normally 200 (Hex). It can
be changed in case a conflict should arise with other adapters
in your system.  Conflicting assignments are marked with an asterisk.
Use the F5=Previous and F6=Next keys to change the address."

NamedItem
Prompt          "Interrupt Level"
Choice          "None"      pos[0]=0XXX000Xb 
Choice          "Level_2"   pos[0]=1XXX000Xb int 2
Choice          "Level_3"   pos[0]=1XXX001Xb int 3
Choice          "Level_4"   pos[0]=1XXX010Xb int 4
Choice          "Level_5"   pos[0]=1XXX011Xb int 5
Choice          "Level_7"   pos[0]=1XXX100Xb int 7
Help
"The VTD/5MC only uses interrupts if it is used in a network.
For standalone use set the interrupt level to 'None'.
Use the F5=Previous and F6=Next keys to change the interrupt level."