AdapterID 06BF4h

AdapterName "ACF REINSA OMNILINK 422  serial ports 422/485"

NumBytes  1

NamedItem

Prompt " Seleccion de salida "

choice "SERIAL_2 SERIAL_3" pos[0] = xxxx001xb io 2F8h-2FFh 3220h-3227h   int 3 3
choice "SERIAL_3 SERIAL_4" pos[0] = xxxx010xb io 3220h-322Fh             int 3 3
choice "SERIAL_4 SERIAL_5" pos[0] = xxxx011xb io 3228h-322Fh 4220h-4227h int 3 3
choice "SERIAL_5 SERIAL_6" pos[0] = xxxx100xb io 4220h-422Fh             int 3 3
choice "SERIAL_6 SERIAL_7" pos[0] = xxxx101xb io 4228h-422Fh 5220h-5227h int 3 3
choice "SERIAL_7 SERIAL_8" pos[0] = xxxx110xb io 5220h-522Fh             int 3 3
choice "SERIAL_8  -------" pos[0] = xxxx111xb io 5228h-522Fh             int 3 3
choice "SERIAL_1 SERIAL_2" pos[0] = xxxx000xb io 3F8h-3FFh 2F8h-2FFh     int 4 3

Help
"The OMNILINK 422/485 is equiped whit two serial ports.
Configurable as SERIAL_1 through
SERIAL_8. I/O port is a follow:
SERIAL_1 Address 3F8 (SYSTEM SERIAL PORT),
SERIAL_2 Address 2F8,SERIAL_3 Address 3220,SERIAL_4 Address 3228,SERIAL_5
Address 4220,SERIAL_6 Address 4228,SERIAL_7 Address 5220,SERIAL_8 Address 5228.
Automatic configuration is SERIAL_2 SERIAL_3 .
The conflictive or uncorrected selections  are marked with
 - * -. In this case, change the used selection.
In the window of the change of configuartion select
    F5 = select previous  F6 = select posterior "

NamedItem

Prompt " Emulatio of control signals"

choice "1_emul    2_emul "     pos[0] = xx00xxxxb
choice "1_notemul 2_emul "     pos[0] = xx01xxxxb
choice "1_emul    2_notemul"   pos[0] = xx10xxxxb
choice "1_notemul 2_notemul"   pos[0] = xx11xxxxb

Help
" This selection allows to emulate the control signal
toward the serial controller. Automatic configuration is:
< 1_emul 2_emul > ."

NamedItem

Prompt " Select RS/422  RS/485"

choice "1_422 2_422"   pos[0] = 11xxxxxxb
choice "1_485 2_422"   pos[0] = 01xxxxxxb
choice "1_422 2_485"   pos[0] = 10xxxxxxb
choice "1_485 2_485"   pos[0] = 00xxxxxxb

Help
" This selection allows to configurate the two serial port
as RS/422 or RS/485
depending of the needs of each installation."