AdapterId 06F57h AdapterName "Octocom OSI8224APS Modem" NumBytes 4 NamedItem Prompt "Communication Port" choice "Serial_2 Int 3 DMA Disabled" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx00b choice "Serial_2 Int 4 DMA Disabled" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx10b choice "Serial_3 Int 3 DMA Disabled" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx01b choice "Serial_3 Int 4 DMA Disabled" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx11b choice "Serial_4 Int 3 DMA Disabled" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx00b choice "Serial_4 Int 4 DMA Disabled" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx10b choice "Serial_1 Int 3 DMA Disabled" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx01b choice "Serial_1 Int 4 DMA Disabled" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=x0xxxx11b choice "Serial_2 Int 3 Single Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx00b choice "Serial_2 Int 4 Single Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx10b choice "Serial_3 Int 3 Single Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx01b choice "Serial_3 Int 4 Single Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx11b choice "Serial_4 Int 3 Single Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx00b choice "Serial_4 Int 4 Single Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx10b choice "Serial_1 Int 3 Single Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx01b choice "Serial_1 Int 4 Single Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=01xxxx11b choice "Serial_2 Int 3 Burst Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx00b choice "Serial_2 Int 4 Burst Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx10b choice "Serial_3 Int 3 Burst Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx01b choice "Serial_3 Int 4 Burst Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx11b choice "Serial_4 Int 3 Burst Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx00b choice "Serial_4 Int 4 Burst Mode" pos[0]=10xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx10b choice "Serial_1 Int 3 Burst Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx01b choice "Serial_1 Int 4 Burst Mode" pos[0]=11xxxxxxb pos[1]=11000xxxb pos[2]=11xxxx11b Help "This modem can be used as Serial port 1 through port 4 with Interrupt level 3 or 4 selected for any serial port. The Serial I/O addresses supported are Serial port 1 = 03F8-03FF, Serial port 2 = 02F8-02FF, Serial port 3 = 03E8- 03EF, and Serial port 4 = 02E8-02EF. The modem will also support either single DMA transfers or burst DMA transfers. Use the F5=Previous and the F6=Next keys to change this assignment." NamedItem Prompt "Arbitration Level" choice "Level_14 Fairness Disabled" pos[3]=xx101110b choice "Level_14 Fairness Enabled" pos[3]=xx111110b choice "Level_13 Fairness Disabled" pos[3]=xx101101b choice "Level_13 Fairness Enabled" pos[3]=xx111101b choice "Level_12 Fairness Disabled" pos[3]=xx101100b choice "Level_12 Fairness Enabled" pos[3]=xx111100b choice "Level_11 Fairness Disabled" pos[3]=xx101011b choice "Level_11 Fairness Enabled" pos[3]=xx111011b choice "Level_10 Fairness Disabled" pos[3]=xx101010b choice "Level_10 Fairness Enabled" pos[3]=xx111010b choice "Level_9 Fairness Disabled" pos[3]=xx101001b choice "Level_9 Fairness Enabled" pos[3]=xx111001b choice "Level_8 Fairness Disabled" pos[3]=xx101000b choice "Level_8 Fairness Enabled" pos[3]=xx111000b choice "Level_7 Fairness Disabled" pos[3]=xx100111b choice "Level_7 Fairness Enabled" pos[3]=xx110111b choice "Level_6 Fairness Disabled" pos[3]=xx100110b choice "Level_6 Fairness Enabled" pos[3]=xx110110b choice "Level_5 Fairness Disabled" pos[3]=xx100101b choice "Level_5 Fairness Enabled" pos[3]=xx110101b choice "Level_4 Fairness Disabled" pos[3]=xx100100b choice "Level_4 Fairness Enabled" pos[3]=xx110100b choice "Level_3 Fairness Disabled" pos[3]=xx100011b choice "Level_3 Fairness Enabled" pos[3]=xx110011b choice "Level_2 Fairness Disabled" pos[3]=xx100010b choice "Level-2 Fairness Enabled" pos[3]=xx110010b Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration. An arbitration level of 0 has the highest priority, and increasing levels have corresponding decreased priority. Bit 5 must always be set to enable the synchronous extended cycle mode."