AdapterID 06FF3h

AdapterName  "3270 Local Communication Card"

NumBytes 1

NamedItem
Prompt "JUMPER - H6,H5,H4,H3,H2,H1"

Choice  "LLLLLL io 02D0h  mem 0CE000h"
 pos[0]=XXXXXXXXb
 io 0220h-022fh  02D0h-02DFh 
 mem 0CE000h-0CFFFFh  

Choice  "LLLLLR io 22D0h  mem 0CC000h"
 pos[0]=XXXXXXXXb
 io 02220h-0222fh  022D0h-022DFh
 mem 0CC000h-0CDFFFh  

Choice  "LLLLRL io 42D0h  mem 0CA000h"
 pos[0]=XXXXXXXXb
 io 04220h-04222fh  042D0h-042DFh
 mem 0CA000h-0CBFFFh  

Choice  "LLLLRR io 62D0h  mem 0C8000h"
 pos[0]=XXXXXXXXb
 io 06220h-0622fh  062D0h-062DFh
 mem 0C8000h-0C9FFFh  

Choice  "LLLRLL io 82D0h  mem 0C6000h"
 pos[0]=XXXXXXXXb
 io 08220h-0822fh  08D0h-08DFh
 mem 0C6000h-0C7FFFh  

Choice  "LLLRLR io A2D0h  mem 0C4000h"
 pos[0]=XXXXXXXXb
 io 0A220h-0A22fh  0A2D0h-0A2DFh
 mem 0C4000h-0C5FFFh  

Choice  "LLLRRL io C2D0h  mem 0C2000h"
 pos[0]=XXXXXXXXb
 io 0C220h-0C22fh  0C2D0h-0C2DFh
 mem 0C2000h-0C3FFFh  

Choice  "LLLRRR io 0E2D0h  mem 0C0000h"
 pos[0]=XXXXXXXXb
 io 0E220h-0E22fh  0E62D0h-0E62DFh
 mem 0C0000h-0C1FFFh  

Choice  "LLRLLL io 02D0h  mem 0DE000h"
 pos[0]=XXXXXXXXb
 io 0220h-022fh  02D0h-02DFh
 mem 0DE000h-0DFFFFh  

Choice  "LLRLLR io 22D0h  mem 0DC000h"
 pos[0]=XXXXXXXXb
 io 02220h-0222fh  022D0h-022DFh
 mem 0DC000h-0DDFFFh  

Choice  "LLRLRL io 42D0h  mem 0DA000h"
 pos[0]=XXXXXXXXb
 io 04220h-0422fh  042D0h-042DFh
 mem 0DA000h-0DBFFFh  

Choice  "LLRLRR io 62D0h  mem 0D8000h"
 pos[0]=XXXXXXXXb
 io 06220h-0622fh  062D0h-062DFh
 mem 0D8000h-0D9FFFh  

Choice  "LLRRLL io 82D0h  mem 0D6000h"
 pos[0]=XXXXXXXXb
 io 08220h-0822fh  08D0h-08DFh
 mem 0D6000h-0D7FFFh  

Choice  "LLRRLR io A2D0h  mem 0D4000h"
 pos[0]=XXXXXXXXb
 io 0A220h-0A22fh  0A2D0h-0A2DFh
 mem 0D4000h-0D5FFFh  

Choice  "LLRRRL io C2D0h  mem 0D2000h"
 pos[0]=XXXXXXXXb
 io 0C220h-0C22fh  0C2D0h-0C2DFh
 mem 0D2000h-0D3FFFh  

Choice  "LLRRRR io 0E2D0h  mem 0D0000h"
 pos[0]=XXXXXXXXb
 io 0E220h-0E22fh  0E62D0h-0E62DFh
 mem 0D0000h-0D1FFFh  




 Help

      "These resources are selectable via jumpers or shorting-plugs
       on the board. L indicates a jumper placed between the center pin
       and the left-hand pin of the indicated jumper set.   R indicates
       a jumper placed between the center pin and the right-hand pin of
       the indicated jumper set."