AdapterId 07005h

AdapterName "AST RampagePlus/MC 386 Adapter with Serial & Parallel Port Option"

NumBytes 4

SysMem 1024 32

NamedItem
      Prompt "Slowest Memory Modules Installed"
      choice "256KB: 80ns; 1MB: 80/85ns"
             pos[0]=1xxxxxxxb
             pos[1]=0xxxxxxxb
      choice "1MB: 100ns"
             pos[0]=0xxxxxxxb
             pos[1]=1xxxxxxxb
      choice "256KB: 100/120ns; 1MB: 120ns"    
             pos[0]=1xxxxxxxb
             pos[1]=1xxxxxxxb

Help
    "Select the group that includes the speed of the slowest SIMM on the
     RampagePlus/MC 386 board.  This option determines the speed at which  
     the RampagePlus/MC 386 board communicates with the bus. 
     To determine the speed of a SIMM, look at the last two digits of the 
     SIMM's model number.  The number 08 indicates an 80-nanosecond (ns)
     SIMM, 10 indicates a 100-ns SIMM, and 12 indicates a 120-ns SIMM."

NamedItem
     Prompt "Connector 1"
	choice "SERIAL_1"
		       pos[2]=xxxx0001b
		       io 03f8h-03ffh int 4
	choice "SERIAL_2"
		       pos[2]=xxxx0011b
		       io 02f8h-02ffh int 3
	choice "SERIAL_3"
		       pos[2]=xxxx0101b
		       io 3220h-3227h int 3
	choice "SERIAL_4"
		       pos[2]=xxxx0111b
		       io 3228h-322fh int 3
	choice "SERIAL_5"
		       pos[2]=xxxx1001b
		       io 4220h-4227h int 3
	choice "SERIAL_6"
		       pos[2]=xxxx1011b
		       io 4228h-422fh int 3
	choice "SERIAL_7"
		       pos[2]=xxxx1101b
		       io 5220h-5227h int 3
	choice "SERIAL_8"
		       pos[2]=xxxx1111b
		       io 5228h-522fh int 3
        choice "DISABLE"
                       pos[2]=xxxxxxx0b
     Help
	"Select the port designation of the I/O Pak/MC
	serial connector. Valid selections range from SERIAL_1
	(first serial port in the computer) to SERIAL_8 (eighth
	port) or Disable. To select a port, press <Esc> to return
	to the change configuration menu and press <F5> and <F6>
	to go through the selections. If an asterisk appears next
        to your selection, it indicates a conflict with another
        port. Change the port to another selection."

NamedItem
     Prompt "Connector 2"
	choice "PARALLEL_1" pos[2]=xx01xxxxb io 03bch-03bfh int 7
	choice "PARALLEL_2" pos[2]=xx10xxxxb io 0378h-037fh int 7
	choice "PARALLEL_3" pos[2]=xx11xxxxb io 0278h-027fh int 5
        choice "DISABLE"    pos[2]=xx00xxxxb 
     Help
	"Select the port designation of the I/O Pak/MC parallel
	 connector. Valid selections range from PARALLEL_1
	(first parallel port in the computer) to PARALLEL_3 (third
	parallel port) or Disable. To select a port, press <Esc> to return
	to the change configuration menu and press <F5> and <F6>
	to go through the selections. If an asterisk appears next
        to your selection, it indicates a conflict with another
        port. Change the port to another selection."