AdapterId 07090h

AdapterName "AST-5251/11A Enhanced Adapter"

NumBytes 1

NamedItem
      Prompt "Shared Memory Address/Size"
      choice "C0000/16K"   pos[0]=XX000XXXb   MEM 0C0000h - 0C3FFFh
      choice "C4000/16K"   pos[0]=XX001XXXb   MEM 0C4000h - 0C7FFFh
      choice "C8000/16K"   pos[0]=XX010XXXb   MEM 0C8000h - 0CBFFFh
      choice "CC000/16K"   pos[0]=XX011XXXb   MEM 0CC000h - 0CFFFFh
      choice "D0000/16K"   pos[0]=XX100XXXb   MEM 0D0000h - 0D3FFFh
      choice "D4000/16K"   pos[0]=XX101XXXb   MEM 0D4000h - 0D7FFFh
      choice "D8000/16K"   pos[0]=XX110XXXb   MEM 0D8000h - 0DBFFFh
      choice "DC000/16K"   pos[0]=XX111XXXb   MEM 0DC000h - 0DFFFFh

Help
"This adapter uses a shared memory interface, the base address of which is
configurable.  This shared memory address cannot be used by any other adapter.
Conflicting addresses are marked with an asterisk.  Use the F5=Previous and
F6=Next keys to change this assignment when in the 'Change configuration'
window."

NamedItem
      Prompt "I/O Addresses"
      choice "250"   pos[0]=XXXXX00Xb   IO 250h-255h
      choice "350"   pos[0]=XXXXX01Xb   IO 350h-355h
      choice "450"   pos[0]=XXXXX10Xb   IO 450h-455h
      choice "550"   pos[0]=XXXXX11Xb   IO 550h-555h

Help
"This adapter uses a range of I/O addresses to communicate with the PS/2.
This range is configurable and need only be changed if it conflicts with
another adapter.  Conflicting assignments are marked with an asterisk.	Use
the F5 = Previous and the F6 = Next keys to change the address range when
in the 'Change configuration' window."

NamedItem
      Prompt "Interrupt Level Assignment"
      choice " 2"  pos[0]=00XXXXXXb   INT 2

Help
"This adapter also communicates with the PS/2 via an interrupt.  Only interrupt
level 2 is supported with this Beta release software."