AdapterId	072F6h

AdapterName	"HYPERTEC HYPERPORT II"

NumBytes	1



NamedItem
Prompt	"Serial Port Address"

	Choice "02F8"	pos[0]=xxxxx01xb	io 02f8h-02ffh
	Choice "3220"	pos[0]=xxxxx11xb	io 3220h-3227h
	Choice "03F8"	pos[0]=xxxxx10xb	io 03f8h-03ffh
	Choice "OFF"	pos[0]=xxxxx00xb

Help
"	This option allows the SERIAL PORT base address to be selected.
If the serial port on the HYPERPORT board is not required, it may be
disabled by selecting 'OFF' ."

NamedItem
Prompt	"Serial Port Interrupt Level"

	Choice "Interrupt Level 3"	pos[0]=xxxx0xxxb	int 3
	Choice "Interrupt Level 4"	pos[0]=xxxx1xxxb	int 4

Help
"	The interrupt levels for serial ports depend on the software 
being used. In general, if the serial port address is 3F8, then
use interrupt level 3, and if 2F8, use interrupt level 4.
 You should consult the appropriate software manuals
to determine what interrupt level is needed. If interrupts are not
used, or your HYPERPORT serial port is disabled, this option
may be ignored."





NamedItem
Prompt 	"Parallel Port Address"

	Choice "3BC"	pos[0]=xx11xxxxb	io 3BCh-3BEh
	Choice "378"	pos[0]=xx10xxxxb	io 378h-37ah
	Choice "278"	pos[0]=xx01xxxxb	io 278h-27ah
	Choice "OFF"	pos[0]=xx00xxxxb

Help
"	This option allows the PARALLEL PORT base address to be selected.
If the HYPERPORT parallel port is not required, you should
select 'OFF'."

NamedItem
Prompt	"Parallel Port Interrupt Level"

	Choice "Interrupt Level 7"	pos[0]=x0xxxxxxb	int 7
	Choice "Interrupt Level 5"	pos[0]=x1xxxxxxb	int 5

Help
"	The interrupt level for the parallel port depends on the software
being used. You should consult the appropriate software manuals
to determine what interrupt level is needed. If interrupts are not
used, or this port is 'OFF', then this option may be ignored."