AdapterID 7DDEh

AdapterName "Mountain 16 Bit SCSI Host Adapter"

NumBytes 4

NamedItem
    Prompt "I/O Address Range"
	Choice "330H-33FH" 
	    pos[1]=xxxxx000b 
	    io 0330h-033fh
	Choice "730H-73FH" 
	    pos[1]=xxxxx001b 
	    io 0730h-073fh
	Choice "1330H-133FH" 
	    pos[1]=xxxxx010b 
	    io 1330h-133fh
	Choice "1730H-173FH" 
	    pos[1]=xxxxx011b 
	    io 1730h-173fh
	Choice "4330H-433FH" 
	    pos[1]=xxxxx100b 
	    io 4330h-433fh
	Choice "4730H-473FH" 
	    pos[1]=xxxxx101b 
	    io 4730h-473fh
	Choice "5330H-533FH" 
	    pos[1]=xxxxx110b 
	    io 5330h-533fh
	Choice "5730H-573FH" 
	    pos[1]=xxxxx111b 
	    io 5730h-573fh

    Help
	"This assignment selects the I/O base address used by this
	adapter.  The address range selected must not conflict with
	any other adapter.  Conflicting assignments are marked with
	an asterisk and must be changed to use the adapter.
	(Default: 330H-33FH)"


NamedItem

    Prompt "Interrupt Level"
	Choice "Int_11" 
	    pos[2]=xxxxx101b 
	    int 11d
	Choice "Int_15" 
	    pos[2]=xxxxx111b 
	    int 15d
	Choice "Int_12" 
	    pos[2]=xxxxx110b 
	    int 12d
	Choice "Int_10" 
	    pos[2]=xxxxx100b 
	    int 10d
	Choice "Int_9"  
	    pos[2]=xxxxx011b 
	    int 9d
	Choice "Int_7"  
	    pos[2]=xxxxx010b 
	    int 7d
	Choice "Int_5"  
	    pos[2]=xxxxx001b 
	    int 5d
	Choice "Int_3" 
	    pos[2]=xxxxx000b 
	    int 3d

    Help
	"This assignment selects the interrupt level used by this adapter.
	The available interrupt levels are 3, 5, 7, 9, 10, 11, 12 and 15.
	If possible, select an interrupt level that is not being used by
	another adapter.  (Default: Int_15)"


NamedItem
    Prompt "DMA Arbitration Level"
   Choice "Level_5"  
	    pos[3]=xx0x0101b
	    arb 5d
	Choice "Level_6"  
	    pos[3]=xx0x0110b
	    arb 6d
	Choice "Level_7"  
	    pos[3]=xx0x0111b
	    arb 7d
	Choice "Level_0"  
	    pos[3]=xx0x0000b
	    arb 0d
	Choice "Level_1"  
	    pos[3]=xx0x0001b
	    arb 1d
	Choice "Level_2"  
	    pos[3]=xx0x0010b
	    arb 2d
	Choice "Level_3"  
	    pos[3]=xx0x0011b
	    arb 3d
	Choice "Level_4"  
	    pos[3]=xx0x0100b
	    arb 4d
    	Choice "Level_8"  
	    pos[3]=xx0x1000b
	    arb 8d
	Choice "Level_9"  
	    pos[3]=xx0x1001b
	    arb 9d
	Choice "Level_10" 
	    pos[3]=xx0x1010b
	    arb 10d
	Choice "Level_11" 
	    pos[3]=xx0x1011b
	    arb 11d
	Choice "Level_12" 
	    pos[3]=xx0x1100b
	    arb 12d
	Choice "Level_13" 
	    pos[3]=xx0x1101b
	    arb 13d
	Choice "Level_14" 
	    pos[3]=xx0x1110b
	    arb 14d

    Help
	"This assignment selects the DMA arbitration level.  If
	there is a conflicting assignment, it will be marked with 
	an asterisk.  An arbitration level of 0 has the highest
	priority.  Level 14 has the lowest priority.
	(Default: Level_6)"


NamedItem
    Prompt "DMA Transfer Mode"
	Choice "Burstmode" 
	    pos[2]=xxxx1xxxb
	Choice "Single_Transfer" 
	    pos[2]=xxxx0xxxb

    Help
	"This setting determines which type of DMA transfers will occur
	between the host and this adapter.  If Burstmode is selected,
	data will be transfered in 8 byte blocks.  If Single_Transfer
	is selected, a full DMA handshake will occur for each byte
	transfered.  (Default: Burstmode)"


NamedItem
    Prompt "Fairness On/Off"
	Choice "On" 
	    pos[3]=xxx0xxxxb
	Choice "Off" 
	    pos[3]=xxx1xxxxb

    Help
	"This assignment determines whether the IBM fairness algorithm
	is to be employed during DMA arbitration.  If fairness is enabled,
	all arbitrating devices will have access to the bus in a
	round-robin fashion.  If fairness is disabled, the highest level
	arbiter will always win arbitration and control the bus.
	(Default: On)"