AdapterId 080FDh

AdapterName  "STB MC/MVP ERGO VGA Adapter"

NumBytes 4

FixedResources
		     pos[0]=XX11XXXXb
		     pos[1]=XXXXXXXXb
		     pos[2]=00000000b
		     pos[3]=11XXXXXXb

;
;   The IO addresses shown below are dummies to cause the Automatic
;   Configuration to assign unique (hopefuuly sequential) board numbers
;   to each board.
;
;   The board actually uses addresses 3C0-3DF just like a regular VGA.
;

NamedItem
   Prompt  "Board number"
      Choice "1,2" pos[0]=XXXX000Xb   pos[3]=XX010000b
		 io 03C0h-03C1h
		 mem 0C0000h-0C7F1Fh
      Choice "3,4" pos[0]=XXXX010Xb   pos[3]=XX11XXXXb
		 io 03C2h-03C3h
		 mem 0C7F20h-0C7F3Fh
      Choice "5,6" pos[0]=XXXX100Xb   pos[3]=XX11XXXXb
		 io 03C4h-03C5h
		 mem 0C7F40h-0C7F5Fh
      Choice "7,8" pos[0]=XXXX110Xb   pos[3]=XX11XXXXb
		 io 03C6h-03C7h
		 mem 0C7F60h-0C7F7Fh

   Help
      "This allows support for multiple boards to be installed
      in your system.  Each STB video board must have a unique
      board number assigned to it.  Board numbers must be assigned
      sequentially starting at BOARD 1.  The Video BIOS for all
      boards is accessed only from BOARD 1."


NamedItem
   Prompt  "Clock frequency group select"
      Choice "Normal   " pos[0]=11XXXXXXb
      Choice "Ergonomic" pos[0]=00XXXXXXb

   Help
      "Selects one of two possible video frequency sets, Normal
      for most monitors, Ergonomic for high refresh ergonomic
      monitors ( *** Danger ---> Ergonomic frequencies can do
      permanent damage to some monitors. Consult manual. *** )"