AdapterId 090EEh

AdapterName "SVGA Adapter/A"

NumBytes 4

FixedResources
        pos[1]=11111111b
        pos[2]=11101110b
        pos[3]=11010000b
        io 3b0h-3bbh 3c0h-3dfh
        int 9

Begin Device 03h 01h 00h NoDMA

NamedItem Prompt "Video I/O Address"
        choice "Instance 6: 2160h - 216Fh"
                pos[0]=XXXX110Xb io 02160h-0216fh
        choice "Instance 1: 2110h - 211Fh"
                pos[0]=XXXX001Xb io 02110h-0211fh
        choice "Instance 2: 2120h - 212Fh"
                pos[0]=XXXX010Xb io 02120h-0212fh
        choice "Instance 3: 2130h - 213Fh"
                pos[0]=XXXX011Xb io 02130h-0213fh
        choice "Instance 4: 2140h - 214Fh"
                pos[0]=XXXX100Xb io 02140h-0214fh
        choice "Instance 5: 2150h - 215Fh"
                pos[0]=XXXX101Xb io 02150h-0215fh
        choice "Instance 7: 2170h - 217Fh"
                pos[0]=XXXX111Xb io 02170h-0217fh
        choice "Instance 0: 2100h - 210Fh"
                pos[0]=XXXX000Xb io 02100h-0210fh

        Help
         "This field shows the I/O (Input/Output) address range for the display
         controller registers.
         Each adapter you install must have a unique address range.  Normally,
         the address range does not need to be changed.
         If you are in the 'Change Configuration' window, you can change
         the setting.  Use F5 and F6 to scroll through the choices, the Up
         and Down arrow keys to move from field to field.
         If a setting conflicts with another, an asterisk (*) appears next to
         the conflicts.  You must fix conflicts before you use the adapter."

End