AdapterId 0CCECh

AdapterName  "CORnet LAN Interface Adapter"
; QNX Version

NumBytes 4

FixedResources
	POS[0]=XXXX111Xb
	POS[1]=XXXXXXXXb
	POS[2]=11111XXXb
; bits 3 and 4 must be high (ET1 and ET2)
	POS[3]=XX000000b

NamedItem
   Prompt "Interrupt Level"
	choice "Int 7" pos[2]=XXXXX111b INT 7
	choice "Int 2" pos[2]=XXXXX010b INT 2
; Int 9 is not supported by software (QNX)
	choice "Int 3" pos[2]=XXXXX011b INT 3
	choice "Int 4" pos[2]=XXXXX100b INT 4
	choice "Int 5" pos[2]=XXXXX101b INT 5
	choice "Int 6" pos[2]=XXXXX110b INT 6
; Int 6 is used by the floppy disk controller

   Help
"Select the interrupt priority of the interrupt
generated by this adapter. Int 9 is the highest,
3 is next and 7 is lowest. Int 9 is not currently
supported. Int 6 is usually reserved for the
floppy disk controller."

NamedItem
   Prompt "Memory Location"
	choice "CC000-CDFFF"
		pos[0]=0011XXXXb
		MEM 0CC000H - 0CDFFFH
	choice "CE000-CFFFF"
		pos[0]=0001XXXXb
		MEM 0CE000H - 0CFFFFH
	choice "DC000-DDFFF"
		pos[0]=0010XXXXb
		MEM 0DC000H - 0DDFFFH
	choice "DE000-DFFFF"
		pos[0]=0000XXXXb
		MEM 0DE000H - 0DFFFFH
Help
"Select the memory base for the Network ROM and Message
Buffer RAM."