AdapterId 0DEFFh

AdapterName "IBM Multi-Protocol Communications Adapter"

NumBytes 2

Begin Device 6 0 1
NamedItem
	Prompt "Communications Port"
      choice "SDLC 1, Arb 1"    pos[0]=XXX1000Xb pos[1]=XXXX0001b
				io 0380h-038fh	int 3 4  arb 1
      choice "SDLC 1, Arb 7"    pos[0]=XXX1000Xb pos[1]=XXXX0111b
				io 0380h-038fh	int 3 4  arb 7
      choice "SDLC 1, Arb 0"    pos[0]=XXX1000Xb pos[1]=XXXX0000b
				io 0380h-038fh	int 3 4  arb 0
      choice "SDLC 1, Arb 3"    pos[0]=XXX1000Xb pos[1]=XXXX0011b
				io 0380h-038fh	int 3 4  arb 3
      choice "SDLC 1, Arb 4"    pos[0]=XXX1000Xb pos[1]=XXXX0100b
				io 0380h-038fh	int 3 4  arb 4
      choice "SDLC 1, Arb 5"    pos[0]=XXX1000Xb pos[1]=XXXX0101b
				io 0380h-038fh	int 3 4  arb 5
      choice "SDLC 1, Arb 6"    pos[0]=XXX1000Xb pos[1]=XXXX0110b
				io 0380h-038fh	int 3 4  arb 6
      choice "SDLC 1, Arb 8"    pos[0]=XXX1000Xb pos[1]=XXXX1000b
				io 0380h-038fh	int 3 4  arb 8
      choice "SDLC 1, Arb 9"    pos[0]=XXX1000Xb pos[1]=XXXX1001b
				io 0380h-038fh	int 3 4  arb 9
      choice "SDLC 1, Arb 10"   pos[0]=XXX1000Xb pos[1]=XXXX1010b
				io 0380h-038fh	int 3 4  arb 10
      choice "SDLC 1, Arb 11"   pos[0]=XXX1000Xb pos[1]=XXXX1011b
				io 0380h-038fh	int 3 4  arb 11
      choice "SDLC 1, Arb 12"   pos[0]=XXX1000Xb pos[1]=XXXX1100b
				io 0380h-038fh	int 3 4  arb 12
      choice "SDLC 1, Arb 13"   pos[0]=XXX1000Xb pos[1]=XXXX1101b
				io 0380h-038fh	int 3 4  arb 13
      choice "SDLC 1, Arb 14"   pos[0]=XXX1000Xb pos[1]=XXXX1110b
				io 0380h-038fh	int 3 4  arb 14

      choice "SDLC 2, Arb 1"    pos[0]=XXX1001Xb pos[1]=XXXX0001b
				io 03a0h-03afh	int 3 4  arb 1
      choice "SDLC 2, Arb 7"    pos[0]=XXX1001Xb pos[1]=XXXX0111b
				io 03a0h-03afh	int 3 4  arb 7
      choice "SDLC 2, Arb 0"    pos[0]=XXX1001Xb pos[1]=XXXX0000b
				io 03a0h-03afh	int 3 4  arb 0
      choice "SDLC 2, Arb 3"    pos[0]=XXX1001Xb pos[1]=XXXX0011b
				io 03a0h-03afh	int 3 4  arb 3
      choice "SDLC 2, Arb 4"    pos[0]=XXX1001Xb pos[1]=XXXX0100b
				io 03a0h-03afh	int 3 4  arb 4
      choice "SDLC 2, Arb 5"    pos[0]=XXX1001Xb pos[1]=XXXX0101b
				io 03a0h-03afh	int 3 4  arb 5
      choice "SDLC 2, Arb 6"    pos[0]=XXX1001Xb pos[1]=XXXX0110b
				io 03a0h-03afh	int 3 4  arb 6
      choice "SDLC 2, Arb 8"    pos[0]=XXX1001Xb pos[1]=XXXX1000b
				io 03a0h-03afh	int 3 4  arb 8
      choice "SDLC 2, Arb 9"    pos[0]=XXX1001Xb pos[1]=XXXX1001b
				io 03a0h-03afh	int 3 4  arb 9
      choice "SDLC 2, Arb 10"   pos[0]=XXX1001Xb pos[1]=XXXX1010b
				io 03a0h-03afh	int 3 4  arb 10
      choice "SDLC 2, Arb 11"   pos[0]=XXX1001Xb pos[1]=XXXX1011b
				io 03a0h-03afh	int 3 4  arb 11
      choice "SDLC 2, Arb 12"   pos[0]=XXX1001Xb pos[1]=XXXX1100b
				io 03a0h-03afh	int 3 4  arb 12
      choice "SDLC 2, Arb 13"   pos[0]=XXX1001Xb pos[1]=XXXX1101b
				io 03a0h-03afh	int 3 4  arb 13
      choice "SDLC 2, Arb 14"   pos[0]=XXX1001Xb pos[1]=XXXX1110b
				io 03a0h-03afh	int 3 4  arb 14

      choice "BISYNC 1"  pos[0]=XXX1100Xb  io 03a0h-03abh  int 3 4
      choice "BISYNC 2"  pos[0]=XXX1101Xb  io 0380h-038bh  int 3 4
      choice "SERIAL 1"  pos[0]=XXX0000Xb  io 03f8h-03ffh  int 4
      choice "SERIAL 2"  pos[0]=XXX0001Xb  io 02f8h-02ffh  int 3
      choice "SERIAL 3"  pos[0]=XXX0010Xb  io 3220h-3227h  int 3
      choice "SERIAL 4"  pos[0]=XXX0011Xb  io 3228h-322fh  int 3
      choice "SERIAL 5"  pos[0]=XXX0100Xb  io 4220h-4227h  int 3
      choice "SERIAL 6"  pos[0]=XXX0101Xb  io 4228h-422fh  int 3
      choice "SERIAL 7"  pos[0]=XXX0110Xb  io 5220h-5227h  int 3
      choice "SERIAL 8"  pos[0]=XXX0111Xb  io 5228h-522fh  int 3
   Help
"This field is used to set a communications port.  The port can be set
as either the primary or secondary synchronous (SDLC), or bisynchronous
(BISYNC) port or it can be set as serial port.	For Primary SDLC, select
SDLC1.	For Secondary SDLC, select SDLC2.  For Primary BISYNC, select
BISYNC1.  For Secondary BISYNC, select BISYYNC2.  For serial port, select
Serial 1 through 8.
If you are in the 'Change Configuration' window, you can change
the setting.  Use F5 and F6 to scroll through the choices, the Up
and Down arrow keys to move from field to field.
If a setting conflicts with another, an asterisk (*) appears next to
the conflicts.	You must fix conflicts before you use the adapter.
(If you are not in the 'Change Configuration' window and you need
to change the setting, return to the 'Set Configuration' window then
select 'Change configuration'.)"
End