; D-Link DT-300 Token-Ring Adapter ; Adapter Description File ; (C) Copyright Datex Systems Inc. 1992, 1993 ; Version 1.0, All rights reserved. AdapterID 0E000h AdapterName "D-Link DT-300 Token-Ring Adapter" NumBytes 4 FixedResources POS[1]=X010XXXXb POS[3]=XXXX0000b NamedItem Prompt "Primary or Alternate adapter" Choice "Primary" POS[1]=XXXXXXX0b IO 0A20h - 0A23h Choice "Alternate" POS[1]=XXXXXXX1b IO 0A24h - 0A27h Help "PRIMARY OR ALTERNATE ADAPTER: A maximum of two Token-Ring adapters can be installed in this computer. If only one Token-Ring adapter is installed, it can be designated as either Primary or Alternate adapter. If two Token- Ring adapters are installed, one has to be designated as Primary and the other one as Alternate adapter. Primary adapter is controlled through port address from 0A20 to 0A23 whereas Alternate adapter is controlled through port address from 0A24 to 0A27. To change the Primary or Alternate adapter designation, select 'Change Configuration' and then using the F5=Previous and the F6=Next keys. If an entry has an asterisk (*) besides it, that particular entry has port address that is the same as other entries and the port address for that entry has to be changed. If the port contention can not be resolved using this method, one can try to change the settings on other adapters as an alternative." NamedItem Prompt "Adapter Data Rate" Choice "4 Mbps" POS[1]=XXXXXX0Xb Choice "16 Mbps" POS[1]=XXXXXX1Xb Help "ADAPTER DATA RATE: In order for the Token-Ring adapter to function properly in a Token-Ring network, the data rate for the Token-Ring adapter has to be the same data rate used by the network, either 4 Mbps or 16 Mbps. To change the setting for adapter data rate, select 'Change Configuration' and use the F5=Previous and the F6=Next keys." NamedItem Prompt "ROM Address Range" Choice "CC000-CDFFF" POS[2]=1100110Xb MEM 0CC000h - 0CDFFFh Choice "CE000-CFFFF" POS[2]=1100111Xb MEM 0CE000h - 0CFFFFh Choice "D0000-D1FFF" POS[2]=1101000Xb MEM 0D0000h - 0D1FFFh Choice "D2000-D3FFF" POS[2]=1101001Xb MEM 0D2000h - 0D3FFFh Choice "D4000-D5FFF" POS[2]=1101010Xb MEM 0D4000h - 0D5FFFh Choice "D6000-D7FFF" POS[2]=1101011Xb MEM 0D6000h - 0D7FFFh Choice "D8000-D9FFF" POS[2]=1101100Xb MEM 0D8000h - 0D9FFFh Choice "DA000-DBFFF" POS[2]=1101101Xb MEM 0DA000h - 0DBFFFh Choice "DC000-DDFFF" POS[2]=1101110Xb MEM 0DC000h - 0DDFFFh Choice "DE000-DFFFF" POS[2]=1101111Xb MEM 0DE000h - 0DFFFFh ; Choice "C0000-C1FFF" ; POS[2]=1100000Xb ; MEM 0C0000h - 0C1FFFh ; ; Choice "C2000-C3FFF" ; POS[2]=1100001Xb ; MEM 0C2000h - 0C3FFFh ; ; Choice "C4000-C5FFF" ; POS[2]=1100010Xb ; MEM 0C4000h - 0C5FFFh ; ; Choice "C6000-C7FFF" ; POS[2]=1100011Xb ; MEM 0C6000h - 0C7FFFh ; Choice "C8000-C9FFF" POS[2]=1100100Xb MEM 0C8000h - 0C9FFFh Choice "CA000-CBFFF" POS[2]=1100101Xb MEM 0CA000h - 0CBFFFh Help "ROM ADDRESS RANGE: 12 address ranges are available for the 8K ROM to reside. The address range CC000-CDFFF is the best choice if there is no address conflict. Care must be taken to assure that the selected ROM address range does not coincide with the RAM address range for the same adapter or is used by other adapters in the same computer. To set the ROM address range, select 'Change Configuration' and use the F5=Previous and the F6=Next keys. If an entry has an asterisk(*) besides it, that particular entry has ROM address range that overlaps with other entries and the ROM address for that entry has to be changed. If the address contention can not be resolved using this method, one can try to change the settings on other adapters on the same computer as an alternative." NamedItem Prompt "RAM Size and Address Range" Choice "16 KB / D8000-DBFFF" POS[0]=1101100Xb POS[1]=XXXX01XXb MEM 0D8000h - 0DBFFFh Choice "16 KB / DC000-DFFFF" POS[0]=1101110Xb POS[1]=XXXX01XXb MEM 0DC000h - 0DFFFFh Choice "16 KB / C0000-C3FFF" POS[0]=1100000Xb POS[1]=XXXX01XXb MEM 0C0000h - 0C3FFFh Choice "16 KB / C4000-C7FFF" POS[0]=1100010Xb POS[1]=XXXX01XXb MEM 0C4000h - 0C7FFFh Choice "16 KB / C8000-CBFFF" POS[0]=1100100Xb POS[1]=XXXX01XXb MEM 0C8000h - 0CBFFFh Choice "16 KB / CC000-CFFFF" POS[0]=1100110Xb POS[1]=XXXX01XXb MEM 0CC000h - 0CFFFFh Choice "16 KB / D0000-D3FFF" POS[0]=1101000Xb POS[1]=XXXX01XXb MEM 0D0000h - 0D3FFFh Choice "16 KB / D4000-D7FFF" POS[0]=1101010Xb POS[1]=XXXX01XXb MEM 0D4000h - 0D7FFFh Choice "8 KB / D8000-D9FFF" POS[0]=1101100Xb POS[1]=XXXX00XXb MEM 0D8000h - 0D9FFFh Choice "8 KB / DA000-DBFFF" POS[0]=1101101Xb POS[1]=XXXX00XXb MEM 0DA000h - 0DBFFFh Choice "8 KB / DC000-DDFFF" POS[0]=1101110Xb POS[1]=XXXX00XXb MEM 0DC000h - 0DDFFFh Choice "8 KB / DE000-DFFFF" POS[0]=1101111Xb POS[1]=XXXX00XXb MEM 0DE000h - 0DFFFFh Choice "8 KB / C0000-C1FFF" POS[0]=1100000Xb POS[1]=XXXX00XXb MEM 0C0000h - 0C1FFFh Choice "8 KB / C2000-C3FFF" POS[0]=1100001Xb POS[1]=XXXX00XXb MEM 0C2000h - 0C3FFFh Choice "8 KB / C4000-C5FFF" POS[0]=1100010Xb POS[1]=XXXX00XXb MEM 0C4000h - 0C5FFFh Choice "8 KB / C6000-C7FFF" POS[0]=1100011Xb POS[1]=XXXX00XXb MEM 0C6000h - 0C7FFFh Choice "8 KB / C8000-C9FFF" POS[0]=1100100Xb POS[1]=XXXX00XXb MEM 0C8000h - 0C9FFFh Choice "8 KB / CA000-CBFFF" POS[0]=1100101Xb POS[1]=XXXX00XXb MEM 0CA000h - 0CBFFFh Choice "8 KB / CC000-CDFFF" POS[0]=1100110Xb POS[1]=XXXX00XXb MEM 0CC000h - 0CDFFFh Choice "8 KB / CE000-CFFFF" POS[0]=1100111Xb POS[1]=XXXX00XXb MEM 0CE000h - 0CFFFFh Choice "8 KB / D0000-D1FFF" POS[0]=1101000Xb POS[1]=XXXX00XXb MEM 0D0000h - 0D1FFFh Choice "8 KB / D2000-D3FFF" POS[0]=1101001Xb POS[1]=XXXX00XXb MEM 0D2000h - 0D3FFFh Choice "8 KB / D4000-D5FFF" POS[0]=1101010Xb POS[1]=XXXX00XXb MEM 0D4000h - 0D5FFFh Choice "8 KB / D6000-D7FFF" POS[0]=1101011Xb POS[1]=XXXX00XXb MEM 0D6000h - 0D7FFFh Choice "32 KB / D8000-DFFFF" POS[0]=1101100Xb POS[1]=XXXX10XXb MEM 0D8000h - 0DFFFFh Choice "32 KB / C0000-C7FFF" POS[0]=1100000Xb POS[1]=XXXX10XXb MEM 0C0000h - 0C7FFFh Choice "32 KB / C8000-CFFFF" POS[0]=1100100Xb POS[1]=XXXX10XXb MEM 0C8000h - 0CFFFFh Choice "32 KB / D0000-D7FFF" POS[0]=1101000Xb POS[1]=XXXX10XXb MEM 0D0000h - 0D7FFFh Choice "64 KB / D0000-DFFFF" POS[0]=1101000Xb POS[1]=XXXX11XXb MEM 0D0000h - 0DFFFFh Choice "64 KB / C0000-CFFFF" POS[0]=1100000Xb POS[1]=XXXX11XXb MEM 0C0000h - 0CFFFFh Help "RAM SIZE AND ADDRESS RANGE: 30 settings addresses are available for the RAM to reside. The RAM size can be anywhere from 8KB to 64 KB. The address range D8000- DBFFF and 16KB size are the best choice if there is no address conflicts. Care must be taken to assure that the selected RAM starting address does not coinside with the ROM address range for the same adapter or is used by other adapters in the same computer. To set the RAM starting address and size, select 'Change Configuration' and use the F5=Previous and the F6=Next keys. If an entry has an asterisk (*) besides it, that particular entry has RAM address range that overlaps with other entries and the RAM address range or size for that entry has to be changed. If the address contention can not be resolved using this method, one can try to change the settings on other adapters on the computer as an alternative." NamedItem Prompt "Interrupt Level" Choice "Interrupt 2" POS[1]=0XXXXXXXb POS[2]=XXXXXXX0b INT 2d Choice "Interrupt 3" POS[1]=1XXXXXXXb POS[2]=XXXXXXX0b INT 3d Choice "Interrupt 10" POS[1]=0XXXXXXXb POS[2]=XXXXXXX1b INT 10d Choice "Interrupt 11" POS[1]=1XXXXXXXb POS[2]=XXXXXXX1b INT 11d Help "INTERRUPT LEVEL: There are 4 interrupt levels available on this Token-Ring adapter and they are interrupt level 2, 3, 10 and 11. Even though any of the 4 interrupt levels can be used, the preferred interrupt level is 2. To set the interrupt level, select 'Change Configuration' and use the F5=Previous and the F6=Next keys."