AdapterId 0EFCBh

AdapterName  "IBM POS Expansion Adapter"

NumBytes 4

fixedresources
        pos[0]=XX0XXXXXb
        pos[3]=11XXXXXXb

nameditem
        Prompt "Card Memory Address range"
          Choice "D8000 - DBFFF"
            pos[0]=0XX1100Xb
            mem 0d8000h-0dbfffh
          Choice "DC000 - DFFFF"
            pos[0]=0XX1110Xb
            mem 0dc000h-0dffffh
          Choice "C4000 - C7FFF"
            pos[0]=0XX0010Xb
            mem 0c4000h-0c7fffh
          Choice "C8000 - CBFFF"
            pos[0]=0XX0100Xb
            mem 0c8000h-0cbfffh
          Choice "CC000 - CFFFF"
            pos[0]=0XX0110Xb
            mem 0cc000h-0cffffh
          Choice "D0000 - D3FFF"
            pos[0]=0XX1000Xb
            mem 0d0000h-0d3fffh

        Help
          "CARD ADDRESS RANGE:
           There are 6 possible 16K blocks of memory that can
           be assigned for accessing the Card Address area of the
           POS Loop Adapter.  The preferred card address for the
           adapter is: D8000 - DBFFF.  Use the F5=Previous and the
           F6=Next keys to change this assignment in the
           'Change Configuration' window.  Conflicting assignments
           are marked with an asterisk (*) and must be changed to
           use the adapter."


nameditem
        Prompt "Card I/O Address range"
          Choice "0400 - 041F"
            pos[3]=XX000001b
            io 0400h-041fh
          Choice "8000 - 801F"
            pos[3]=XX100000b
            io 8000h-801fh
          Choice "0800 - 081F"
            pos[3]=XX000010b
            io 0800h-081fh
          Choice "0C00 - 0C1F"
            pos[3]=XX000011b
            io 0c00h-0c1fh
          Choice "1400 - 141F"
            pos[3]=XX000101b
            io 1400h-141fh
          Choice "1C00 - 1C1F"
            pos[3]=XX000111b
            io 1c00h-1c1fh

        Help
          "CARD I/O ADDRESS RANGE:
           There are 6 possible 32 byte blocks of i/o that can
           be assigned for accessing the Card I/O area of the
           POS Loop Adapter.  The preferred i/o address for the
           adapter is: 0400 - 041F.  Use the F5=Previous and the
           F6=Next keys to change this assignment in the
           'Change Configuration' window.  Conflicting assignments
           are marked with an asterisk (*) and must be changed to
           use the adapter."


namedItem
        Prompt "Interrupt Level"
         Choice "Interrupt 7"
           pos[0]=X0XXXXXXb
           INT 7d
         Choice "Interrupt 11"
           pos[0]=X1XXXXXXb
           INT 11d

  Help "INTERRUPT LEVEL:  This adapter can operate on one of two interrupt
        levels: 7 or 11.  The preferred interrupt level is 7, but the
        adapter can operate on IRQ11 if necessary.
        The assignment for this interrupt level can be changed by
        selecting 'Change Configuration' and then using the F5=Previous
        and the F6=Next keys."