======================= Binary Error Log event ======================= EVM event name: sys.unix.binlog.unknown_class Binary error log events are posted through the binlogd daemon, and stored in the binary error log file, /var/adm/binary.errlog. This event is posted by the EVM/binary error log (binlog) interface component when an unrecognized binary error log event is posted. Action: The event translation provided through the translation utility may provide more detail of the event. ====================================================================== Formatted Message: Unknown binary log event class 197 Event Data Items: Event Name : sys.unix.binlog.unknown_class Priority : 200 Timestamp : 29-Jan-2002 14:37:38 Host IP address : 10.1.1.150 Host Name : dwh Format : Unknown binary log event class $subid_class Reference : cat:evmexp.cat:300 Variable Items: subid_class (INT32) = 197 subid_num (INT32) = 2 subid_unit_num (INT32) = 0 subid_type (INT32) = 1 binlog_event (OPAQUE) = [OPAQUE VALUE: 1088 bytes] ============================ Translation ============================= DECevent version: V3.3 Logging OS 2. Digital UNIX System Architecture 2. Alpha Event sequence number 324. Timestamp of occurrence 28-JAN-2002 14:37:38 Host name dwh System type register x00000023 Systype 35. (Wildfire Family) Number of CPUs (mpnum) x00000002 CPU logging event (mperr) x00000001 Event validity 1. O/S claims event is valid Event severity 5. Low Priority Entry type 197. Fibre Channel Event 1. - (minor class) ------- Unit Info ------- Bus Number 2. Unit Number x0000 ------- Data ------- Class x0001 Adapter - KGPSA Subsystem x0001 Adapter - KGPSA -- PCI Event Frame -- Slot Number 5. Vendor ID x10DF EMULEX Corporation. Device ID xF800 Compaq KGPSA-CA = LP8000 - 168794-B21. Command x0147 I/O Space Accesses Response: Enabled Memory Space Accesses Response: Enabled PCI Bus Master Capability: Enabled Monitor for Special Cycle Ops: DISABLED Generate Mem Wrt/Invalidate Cmds: DISABLED Parity Error Detection Response: Normal Wait Cycle Address/Data Stepping: DISABLED SERR# Sys Err Driver Capability: Enabled Fast Back-to-Back to Many Target: DISABLED Status x0280 Device is 33 Mhz Capable. No Support for User Defineable Features. Fast Back-to-Back to Different Targets, Is Supported in Target Device. Device Select Timing: Medium. Revision ID x02 Class Code x00040C Cache Line Size x10 Latency Timer xF8 Header Type x00 Single Function Device. BIST x00 Slim Base Addr Low x01000000 Slim Base Addr High x01000000 Ctrl Reg Memory Addr Low x01001000 Ctrl Reg Memory Addr High x01001000 Ctrl Reg IO Addr Low xFF010000 Subsystem Vendor ID x0000 Subsystem ID x0000 ROM Base Addr x00000000 Interrupt Line x34 Interrupt Pin x01 Min_Gnt xFF Max_Lat x00 - Port Interface Data - Host Attention Reg x00000000 BIU Host Status Reg x00000000 BIU2 Host Control Reg x00000000 Firefly Attention Reg x00000000 Mailbox Interrupt Active. BUI2 Configuration Reg x00000000 Synchronizer Contain One Stage of Registers. Little Endian Mode. No Access to the PCI Config Regs. Allow Host Access to Slim and BUI Regs. DMA Arbitration Style: Rotating Priority. BIU2 Error Status Reg x00000000 BIU Chip Type x00000002 BUI2. BIU Chip Rev x2002506D Protocol Firmware Rev x07233854 If the value is less than 0x07112232 for a LP7000 a micro code upgrade is available. If the value is less than 0x07233091 for a LP8000 a micro code upgrade is available. Protocol POST Revision xFF202050 Endec+ Chip Revision x00000000 KGPSA State x00000400 Public Loop or Fabric. KGPSA Topology x00000001 Fibre Channel point to point or fabric connection. KGPSA ID On Loop x00011200 Current Mail Box Reg 0 x00000000 Current Mail Box Reg 1 x00000000 Current Mail Box Reg 2 x00000000 Current Mail Box Reg 3 x00000000 Current Mail Box Reg 4 x00000000 Current Mail Box Reg 5 x00000000 Current Mail Box Reg 6 x00000000 Current Mail Box Reg 7 x00000000 Current Mail Box Reg 8 x00000000 Current Mail Box Reg 9 x00000000 Current Mail Box Reg 10 x00000000 Current Mail Box Reg 11 x00000000 Current Mail Box Reg 12 x00000000 Current Mail Box Reg 13 x00000000 Current Mail Box Reg 14 x00000000 Current Mail Box Reg 15 x00000000 Current Mail Box Reg 16 x00000000 Current Mail Box Reg 17 x00000000 Current Mail Box Reg 18 x00000000 Current Mail Box Reg 19 x00000000 Current Mail Box Reg 20 x00000000 Current Mail Box Reg 21 x00000000 Current Mail Box Reg 22 x00000000 Current Mail Box Reg 23 x00000000 Current Mail Box Reg 24 x00000000 Current Mail Box Reg 25 x00000000 Current Mail Box Reg 26 x00000000 Current Mail Box Reg 27 x00000000 Current Mail Box Reg 28 x00000000 Current Mail Box Reg 29 x00000000 Current Mail Box Reg 30 x00000000 Current Mail Box Reg 31 x00000000 Link Status MBX Reg 0 x00000000 Command Number: x00000000 Success. Link Status MBX Reg 1 x00000000 Link Status MBX Reg 2 x00000000 Link Failure Error Count. Link Status MBX Reg 3 x00000000 Loss of Sync Error Count. Link Status MBX Reg 4 x00000000 Loss of Signal Error Count. Link Status MBX Reg 5 x00000000 Loss of Sequence Error Count. Link Status MBX Reg 6 x00000000 Invalid Transmission Word Error Count. Link Status MBX Reg 7 x00000000 CRC Error Count. Link Status MBX Reg 8 x00000000 Primitive Sequence Event Timeout Count. Link Status MBX Reg 9 x00000000 Elastic Buffer Overrun Error Count. Link Status MBX Reg 10 x00000000 FCAL Arbitration Timeout Count. Read Status MBX Reg 0 x00000000 Command Number: x00000000 Success. Read Status MBX Reg 1 x00000000 Read Status MBX Reg 2 x00000000 Active Logged Ports: x00000000 Active Exchange Count: x00000000 Read Status MBX Reg 3 x00000000 Transmit Byte Count. Read Status MBX Reg 4 x00000000 Receive Byte Count. Read Status MBX Reg 5 x00000000 Transmit Frame Count. Read Status MBX Reg 6 x00000000 Receive Frame Count. Read Status MBX Reg 7 x00000000 Transmit Sequence Count. Read Status MBX Reg 8 x00000000 Receive Sequence Count. Read Status MBX Reg 9 x00000000 Total Exchanges by this Adapter. Read Status MBX Reg 10 x00000000 Total Exchanges - Adapter is Responder. Read Status MBX Reg 11 x00000000 Number of P_busy Response Frames. Read Status MBX Reg 12 x00000000 Number of F_busy Response Frames. IOCB Word 0 x00000000 IOCB Word 1 x00000000 IOCB Word 2 x00000000 IOCB Word 3 x00000000 IOCB Word 4 x00000000 IOCB Word 5 x00000000 IOCB Word 6 x00000000 IOCB Word 7 x00000000 IOCB Command Status: x00000000 IOCB Command Type: x00000000 Driver Name KGPSA Driver Revision 1.32a Module Name emx_cam_sio_done Error Message IO Status: FCP cmd 0x99 - 0x3(Local Reject) : 0x16(Abort Requested) Channel Address in Loop 15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order 0000: 00011300 00011200 00011100 00011000 *................* 0010: 00000000 00011B00 00011700 00011400 *................* 0020: 00000000 00000000 00000000 00000000 *................* 0030: 00000000 00000000 00000000 00000000 *................* 0040: 00000000 00000000 00000000 00000000 *................* 0050: 00000000 00000000 00000000 00000000 *................* 0060: 00000000 00000000 00000000 00000000 *................* 0070: 00000000 00000000 00000000 00000000 *................* Fibre Channel Error Code x00000000 ======================================================================