After trying many different combinations, I finally came up with
plugging it into port #2. This only worked however after rebooting a
couple times and killing/restarting the ups daemon.. but IT WORKS!
Thanks to all suggestions.... now.. what was that UPS password
again?? :)
> Well I couldn't find an answer to how to find the serial port
> settings when the alphaserver was running so I have taken it down and
> looked through the BIOS settings as still see nothing related to the
> serial ports. Is there something simple I am missing to see if they
> are enabled or configured properly? This all started when connecting
> a UPS to the serial port. The cable and UPS have been confirmed to
> be working correctly which leaves the device or port settings on the
> server.
>
> Help?
>
> (DU4.0D) Thanks.
>
__________________________________________________________________
| Gary Munroe |
|------------------------------------------------------------------|
| I.T.S., AS/400 Services Work: gmunroe_at_flemingc.on.ca |
| Sir Sandford Fleming College Home: izzi_at_calweb.com |
| (705) 749-5523 x1409 Web:
http://www.calweb.com/~izzi |
|__________________________________________________________________|
Received on Wed Dec 23 1998 - 20:50:37 NZDT